• metal
  • Imported
  • 6-Feet multipurpose scaffolding with four 5-Inch locking swivel casters
  • For interior or exterior use, All steel construction, Durable powder coated paint finish in yellow
  • 1/2-Inch thick wooden deck with steel frame
  • 1,000-Pound capacity, 29-Inch wide, fits through standard doorways
  • Meets OSHA and ANSI scaffolding regulations

Easy to order, delivered to my door, easy to assemble/disassemble, quality product, works great, good price, expect it to serve many needs for many years. What is not to like? Also my wife loves it.

Love love love the simplicity and sturdiness of this scaffolding. Just what I needed to paint high ceilings. Plus what a great item to have around for hard to reach projects!

Super quality. Fast shipping. Fantastic price. I should hav gotten one years ago. Heavy duty. For home use ill never wear it out. Great platform. Big enough to use and not to big for in home use. I really like it

This is a great product! I do all the painting in our home and in the past used ladders. This makes it so much easier. A good stable platform that you can adjust to the perfect height. Really decreases the number of trips up and down a ladder. Makes it much easier to reach all areas. It locks into place and navigates to different areas easily. Easy to assemble - took my husband about five minutes. Highly recommend!

First let me say I ordered this scaffold using Amazon Prime. I ordered it on a Monday and it was delivered to my door on Thursday. All of this for $169. For $169 delivered this is an unbelievable bargain. My best buy of the year! Now to discuss the product. The scaffold is well built and very adequate for home use. I am renovating a home I purchased. The ceiling was popcorn with several layers of paint. A lot of scraping and patching. I purchased this to avoid doing all of this from a ladder. Works great. Easy to break down and move to other parts of the home. At first glance the plywood used on the platform looks thin. I thought I would have to replace it with 3/4. I was wrong, the paltform does not sag at all under my weight (195 lbs.). I needed a working height of about 18". This scaffold will not go that low. I didn't measure but the minimum height is probably about 24". Not really a big deal, I just have to watch my head. I used the safety pins that came with the unit. I did not add bolts as some have suggested. The unit is stable and firm with no wiggle or swaying. If the platform were at max height I could see where it may feel unstable. But if you have it that high it should be tied off anyway. There was a minor problem where one leg tube was slightly crushed so the wheel would not insert. A ten second fix with vice grips. If you can't make this small of a repair, you have no business on a scaffold. The wheel locks are stiff and hard to use. I stopped using them with no problem. Again for the price it is an fantastic scaffold.

Arrived ahead of time in good shape . Was easy to assemble 10miin. Was ready to go . Sturdy and easy to raise and lower platform. Very happy with purchase will be perfect hight power wash my 34tt rv, which is one of the main reasons I purchased it rolls easy wheels lock firmly in place. It will surely beat the heck out a step ladder !!!!

I WAS HESITANT TO ORDER THESE BASED ON OTHER REVIEWS THAT SAID THEY WERE AFRAID TO USE THEM. I'M 70+ YEARS OLD AND NORTH OF 200 LB AND I HAVE NO PROBLEM CLIMBING ON OR USEING THIS SCAFFOLD IT'S MUCH MORE STABLE THAN ANY LADDER THAT I'VE EVER USED, THEY MIGHT NOT BE AS STURDY AS SOME PRO MODELS BUT THERE IS NOTHING WRONG WITH THESE I FULLY EXPECT THEM TO LAST ME THE REST OF MY LIFE.

I bought this because Harbor Freight would not honor a 20% off coupon and I did not want to wait for it to go on sale. I paid $10 more on Amazon but it was delivered to my house in four days with no defects. I am in my 70's and want to stand on a platform instead of a ladder while working on the eaves of our one story house. This unit does wobble a little but it is not dangerous in my opinion. The wobble is because of the 3/32 of an inch clearance that is necessary to slide the platform up and down on the rails of the two side ladders. At my age, I am more likely to forget I am on a platform and walk off the edge. So I made some safety rails out of 2x2 and 2x3 lumber bolted together with 3/8 X 3 1/2 inch long carriage bolts. Just use the same design as the safety rails that can be purchased that have top, middle and bottom safety rails and posts at the four corners that fit into the cups at the corners of the movable platform. The safety rails move up and down with the platform. I used 2x2's for the verticals and 2x3's for the horizontal rails. A 2x2 is really 1 1/2 X 1 1/2 inches square. I cut one saw blade width off two adjacent sides of one end of the 2x2 so that it fits 4 1/2 inches into the 1 1/4 X 1 1/4 inch ID square cup at the corners of the movable platform and positioned so that it fits snug against the side of the end ladder with no gap. The key to stability are the holes predrilled into the vertical sides of the end ladders at two inch intervals. These holes can be used to bolt the vertical 2x2 safety rails to the scaffold as well as connecting 2x4's that can be extended to the floor or ground as outriggers if more stability is desired. The outriggers that are sold attach near the bottom of the scaffold whereas a 2x4 can be attached near the top of the scaffold and extended as far out from the scaffold as is desired providing much more stability. The outrigger ends can be staked to the ground or have a flat board attached to the bottom to sit on the floor and do not need wheels. It can also be attached to the scaffold at multiple heights using additional horizontal cross pieces. Just make the outriggers as you need them. For extra safety, install a 3/8 X 2 1/2 inch bolt with nut through the extra channel hole below each of the four spring loaded platform locking pins whether or not you are using outriggers. These bolts further attach the platform to the ladder posts and mimic the wheel locking pin just below this area. If the platform is used at the highest level, a complete set of safety rails can be made for about $50 using two eight foot 2x2's, six eight foot 2x3's and 24 carriage bolts with nuts and washers. When the platform is used near the half height position, regular eight foot long lumber can be laid across the end ladder rungs parallel to the platform as safety rails if prefabricated safety rails are not available. The upper ladder rungs form the short end of the safety rails. A 4x4 can be used for the bottom toe stop rail. A plank can also be laid across the rungs and used as a shelf. The scaffold can be assembled and moved by one person using techniques shown on several youTube videos and has other applications such as a movable work bench. Many of the negative comments that occur when stacking these units can be resolved by using the techniques herein described. This is a great price for a versatile item that works as advertised and was delivered without defects.

Awesome scaffold! Really pleased with it. I did throw 1/2" diameter x 2 1/4" length bolts into it to stiffen it up and remove wobble as others had done. Really a great scaffold for a great price and the seller is the best!

If you are looking for a moderate-sized scaffold, this one is great. It disassembles into pieces which easily fit in a pickup and is easy to transport. It is a little awkward to set up and adjust the height but with two people, it can be down quickly with a little practice. Once set up, it is sturdy, rolls on the wheels with little effort and has become a real work horse around our shop. Furthermore, one can stack two of these units to get more height. I think it is a great value!