Features:

  • Works with all brands of synthetic and petroleum-based oils. Including full synthetic, semi- synthetic, conventional, and mineral. Gas or Diesel engines.
  • Recommended to be used in all automobile, truck, lawn, marine, agriculture and heavy-duty equipment.
  • Increases horsepower, lowers operating temperatures and reduces engine noise and vibration in all engines.
  • USAGE: Use 2 ounces per quart of oil in crankcases, 3 ounces for heavy duty and towing applications. Transmissions (Automatic or Manual) Use 1 ounce per quart of transmission fluid. Differentials use 1 ounce per quart of differential fluid. Power steering systems use 1 ounce per quart of fluid. Hydraulic fluid 1 ounce per 2.5 gallons of hydraulic fluid. Motorcycles 1 ounce per quart of fluid max. Lasts multiple fluid changes but maybe used more frequently for best results.
  • Will not wash away with water.
Motor coating indeed!

I bought this after watching a product review on YouTube by "Project Farm" (great content btw) and was impressed by the results. I use this in two of my vehicles, a 2002 Dodge Dakota SXT and a 1994 Corolla. I found that the engine in the Dakota seems to be quieter under load than previously. I didn't notice too much difference in the Corolla, but it being 24 years old, I'm just happy the thing still runs well! I also use this in my push mower for added protection from friction.

Bought this after watching projectfarms YouTube video and...

I have a 1992 GMC Sonoma 2.8l, i run around town on a daily basis and was averaging 15-17mpg (i know it's not good lol), i used this motorkote in the engine my previous oil change and after about 2000miles since then i have went threw multiple tanks of gas i have averaged 18-19mpg not even driving differently at all in town. i have 253,000 miles on the engine and it ran great before and still does now and doesn't use any oil. i also added this to my manual transmission and haven't really noticed anything different with smoother shifts or anything, but doesn't mean it's not working. so far though i would say it's been a great product. if you haven't seen projectfarms YouTube video and a skeptic on "oil additives" that claim they do this or that this guy tests them all out and unbiased and doesn't take sponsorship from any of the companys.

Awesome wear protection. See comment:

I recommend before considering this product watch: project farms you tube video test of this product as an anti wear additive. I have it in several motors and hoping for years of motor longevity

This stuff seems to work

I am not normally one to use additives but I saw this featured on a YouTube Project Farm segment. It seemed to work well. I have an older Jeep so I tried this product. I was actually surprised to see a very small increase in the overall mpg, and a very small decrease in the operating temperature.

Watch Youtube Clips Project Farm.

Easy to use and should be good for long lasting results.

Buy it for all your motors.

I've been using MotorKote for well over 15 years. Add it to your; Motor Oil (2 oz per quart) if your car/truck holds 5 quarts add 10 oz after the motor oil is topped off) Use it once per 4 oil changes (I add it every oil change) my engines are worth it. everywhere else (1 oz per quart) Transmission (do not over fill) Power Steering 18 Wheeler I use half gallon to motor oil 10 gallons plus half gallon MotorKote. My $30k engines are my livelyhood. If you have liquid oil like i.e. 90w140 gear oil in hubs on steeling or trailer hubs I add 2 oz per hub. It's saved me 3 times when a wheel seal leaks. Long story. Buy this. Your engines in cars, pickup truck, motorcycle, lawnmower will run cooler, smoother, and increase HP. I've tried everything on the market (Slick50, Duralub, Extreme Pressure Concentrate) NOTHING COMPARES to MotorKote. It take about 500 miles in motor and about 150 miles in hubs and you'll feel and hear the difference. Any questions please pop me a note. I use it in all my motors. I'm not getting any compensation or discounts. But 6 quarts here is cheaper here than one gallon jugs from the factory and so much easier to use. I buy it by the 5 gallon pale for my 18 wheeler (Truck and Trailer). You will love this product.

Project Farm approved!

Project Farm of YouTube brought me here. Check out his thorough test if this product. Results were very favorable, so l put this in my engine and it already feels smoother, no kidding. I have two cars l added this to: 2009 Kia Optima 2.4 liter 4 cylinder 1993 Mazda MX-6, 2.5 liter V6 I have a vacuum gauge and a ScanGauge II hooked up to the Kia. Prior to adding Motorkote, the Kia would normally pull 18.5-19 inches of vacuum. After adding Motorkote, it now pulls 19.5-20 inches of vacuum. Anyone who knows anything about engines knows that this is a good thing. My digital temp readout is 3°-5° cooler, again a favorable benefit. The old Mazda took well to it also. Both cars feel more sprightly and sound smoother in general. They call to add 2 oz per quart of motor oil. Even if you add just 1 oz per quart, you'd be well ahead in helping your engine last longer. Seems like a great way to decrease engine wear. Thank you Project Farm!!!

Best of the best imo. Awesome product

I have to say first off iv done alot of research on additives iv watched countless videos on YouTube and like most reviews on this product .project farm is the main one that sells it for alot of people he puts the motorkote threw hell and back and then dumps it out the motor and fills the crankcase full of water & runs motor a hour and motor runs fine he checks compression and its still same soooo that alone sold me .if your on the fence about purchasing this go on YouTube & watch PROJECT FARMS video & most important i put this in my motor that had a small lifter tick and now its quite then i put it in my transfer case & it had horrible grinding noises & i can honestly say its cured well worth the money

I will try this stuff on many things in the future.

I bought this to try on stuff other than motors for work purposes. I used it as a cutting fluid (dipping drill bits and taps in it befor drilling) and it works better than every tapping/cutting fluid I have ever used.

I Won't Change Oil Without It. Multiple Uses!

This oil is incredible! What makes it different is how it bonds to the surface and doesn't just sit on the surface. Great for engines to prevent cold start wear! Use this oil on any metal rubbing metal surface and you'll be impressed. Just don't use it on some plastics as it can cause the plastic to become brittle and disintegrate. Things like plastic knobs don't do well after being exposed to it. Use as directed to add to motor oil and transmission fluid. Once added to the motor oil initially, the directions only call for it to be used every other oil change. That should tell you how effective Motorkote is at bonding with metal. It does it without building up and becoming a sludge or varnish like some additives I've seen do. Marvel Mystery Oil comes to mind for building up around valves. Motorkote does not build up. Motorkote is the best lubricant I've ever used. Have been using it for about 6+ years.

Full Reviews