Features:

  • BLUETOOTH COMPATIBLE: Built-in Bluetooth wireless music streaming ability works with all of today’s latest devices including smartphones, tablets, laptops and computers. Hassle-free receiver pairing allow you to stream wireless audio instantly
  • SAFETY CONSCIOUS POWER SWITCH: When the power amp is turned on, there is a three-second delay, which reduces/eliminates the turn-on transients associated with the system equipment connected to the amplifier and protects loudspeakers
  • POWER LED: Built-in power LED indicators illuminate when the AC main power is being supplied to the amp and both channels are operational
  • SHOCKPROOF BINDING POSTS: Shockproof binding posts are provided. For each channel, the outputs are in parallel and the speaker connection cables can be terminated with banana plugs or stripped wires
  • AUTOMATIC COOLING FANS: Two 2-speed DC fans supply cool air to the amplifier. The fans switch to high speed automatically when the unit requires additional cooling
Great for the starter person..........

This works great with the MCM Custom Audio 555-10330 speakers that are found here on Amazon for $39.99. You'll also need 2 Speaker Cable Speakon to 1/4'' that also can be found here on amazon for $11.84. Depending on the source of music(laptop, ipod, controller), you'll also need: 1/8 Inch TRS to Dual 1/4 Inch TS Cable for MP3 devices and computers. But if you are using a controller(Traktor) you'll need a 1/4 to 1/4 audio cable to connect your Traktor controller to the amp's input. Should be able to get everything you need to bounce for under $200.

Good product for extra power not your main

Good amp for what it is I use it with monitors mainly sometimes a sub it hasn’t failed and gone hours of play flawlessly.

This amplifier is awesome I still use it daily

I call this product Pyle on the go. I have brought this amplifier every single gig that I had and trust me I have had a lot of gigs . I have pushed it to its limit and yet it is still going strong . This amplifier is awesome I still use it daily. The fans get a little noisy when you crank up the gain. I am planning on getting high watts . I love how PYLE PUT tiny fit below the amp it really helps a great deal because it allows the amplifier to breath properly . Great product

More than I expected

I read the reviews and was not expecting much.... a simple amp that might be able to keep up with my professional equipment I have acquired over the years. I was very happy and surprised to find the quality was just about as good as my $750 amps. Considering I was just gonna use this for the floor monitors, I may have to now reconsider and power a couple of mains.

Bravo!

This is a great amp - period! I've read reviews on this amp - after I bought it! I have NO problems! I will admit that I am ONLY using it as my home entertainment amp [for now]. Nevertheless, THIS AMP is going in my studio as soon the wife goes to visit her sister. It has 2 cooling fans - that some reviews claim to be so loud and noisy. I've been running this amp now for 8 hours now and so far, I can only assume that these fans kick in when the amp is extraordinarily pushed, which stands to reason - due to the advertisement of it claiming 1000 watts!, etc... Well, how many decibels can the human ear withstand, before going deaf? Then again, if it's good music, it's a good way to go! :]

perfect price power

The amp has a slightly noisy fan, but if you're running this to the proper speakers, you won't hear anything but the bass. I run this to my Pyle PAW15, 15" subwoofer, and it kicks hard. I wasn't expecting earthquakes like I think some people are, but it hits like a beast in a house. GREAT VALUE, I cannot believe how cheap it was. I can't say how long it will last, but it worked extremely well out of the box. If you hear fuzz, adjust your levels to see if you can get rid of it. I'm running this with my subwoofer nad a Rolls Tiny two-way crossover, and if I turn the low frequency level down it starts fuzzing, but with it all the way up it's clear and powerful. Buy this if you need it, but as always make sure you shop around and look at EVERY OPTION. It took me almost 24 hours to decide what equipment to buy for my PA system.

works great for stage monitors

performs exactly how you would think. I am using it to power two stage monitors, sound comes through loud and clear. obviously from some of the negative reviews there must be some quality control issues, but I must have gotten a good one. I am using the speakon outputs to my speakers (had never used these before and didn't realize you need to twist them on - once we figured that out no problems.

Happy with purchase, waiting for live gig test drive!!!

I am happy with the performance of this amp. I hooked up my old Harbinger speakers and barely raised the volume knobs to about a 1/3 and those speakers were kicking and sounded a million times better than they ever did with my old Harbinger amp. I am very confident this amp will not let me down when I take it for a test drive and at my next live gig go past the half mark on the volume knobs. If this amp performs as I expect it on a live event, I will definitely be purchasing another one, and yes, I will post the results after the gig sometime after May 10th.

Great amplifier for budget, serves many applications

I am quite impressed with this amplifier for the low price it has. I am currently using it to run a speaker system in my room(for movies, music, and video games). One channel is dedicated to powering an 8" 400 watt subwoofer at 4 ohms and the 500 watts of power is perfect for this. The second channel is used to power 2 JVC satellite speakers for upper frequencies. They are 8 ohm so really the amplifier can go 250 watts max with them. This system sounds very good for movies as the subwoofer can recieve a lot more power(those store-bought surround sound packages generally come with an underpowered subwoofer) thus the bass frequencies are excellent. For music I reccomend using an ipod or pc connected to the amplifier, that way you will be able to pre-amplify the audio signal and get the RMS value just right. I have tried using a flash drive plugged into my xbox 360 connected to the amplifier for music, but the speaker system is way underpowered as you can't pre-amplify the audio using this method. Anyway, this amplifier works great for the application I am using it for. I can imagine it would work great for applications such as live sound, PA speaker power, etc. I almost forgot to say this, for the inputs it accepts either 2 cannon male inputs, or 2 1/4" male mono jack inputs. For outputs you can use either the three conductor speaker jacks, or the 4 binding posts to connect speaker wire directly to the amplifier. This amplifier is bridgable, so you can get 1000 watt max power output by using the middle conductor speaker jack(it is labeled) or by connecting the speaker wire to the 2 positive binding posts(no negative involved). If you need 1000 watts of power for a particular application then this amp is great for the price and I highly recommend it. Hope this review helped.

Pyle Pro PTA1000 hits like a Rhino!

I bought 2 of these to 'update' my power to my systems. WOW is about all I could say when I hooked these things up! Bass player by profession, I only recently started doing some home recording and learning to play the drums. Originally, I got one of these to 'Mic' my drums, but after I heard how the 1000 watt amp performed, I ordered another one the next day. These things crank like a Rhino charging into your chest, but remain clear and crisp with virtually NO distortion. I have been a Musician for over 40 years, and from today on, I only use PYLE to shove the juice to my speakers!!

Full Reviews