Features:

  • DRAIN & DRY: Finally a bottle drying tree alternative! Eliminate contact with the inside of your bottle drying rack. With two racks, the FastRack24 kit can fit up to 48 standard beer bottles, 24 Bomber/Belgian bottles or 12 Wine bottles
  • DISHWASHER FRIENDLY: The FastRack bottle drying rack and tray are safe to go into your dishwasher after usage. Unlike other bottle drying tree systems, we easily come apart and fit into a dishwasher without any hassle
  • RACK & STACK: Several full FastRack bottle drying racks can be stacked on top of each other up to 5 high for convenient storage inside the FastRack bottle tray. The more you stack, the more secure it gets! Try doing THAT with a typical bottle drying tree!
  • COLLECT AND STORE: Keep your bottle empties organized, stored safely and out of your way ready for the next batch from your home-brew kit
  • TRUST OUR FERMENTATION ACCESSORIES: Many of our FastFerment Conical Fermenter products are designed to work with eachother. Trust FastFerment with all your home-brew kit needs
This is a great product

I use it mainly to store my beer bottles in between sanitizing them with Star San and bottling. It works for all 12oz glass bottles that I collected and they also work for the Mr. Beer Plastic bottles though they do not fit in all the way so I don't stack the FastRack when I use them which I usually don't do anyways so the upper bottles don't drip on the lower ones. It also works great to collect the empty bottles and don't have them stand around in the house. It is VERY sturdy when used with glass bottle, just make sure you have the same size bottles in the four corners where the stands are so it is even. A little pricey but very well engineered product.

Very useful, you will like.

Works great for holding your used bottles. Works great to drain and hold your washed bottles. Good value, would purchase again,...and will! Perfect for use designed. A bit of modification would be nice to accommodate dual purpose. That is if drain tray was slightly larger to enable holding bottles in a top up position with the rack holding bottles securely for the filling process. This would save damaging your cardboard cartons (or floor) from spillage during bottle filling and the inadvertent bottle tipping over.

Great for bottles

Does what it says. Only the shorter/wider bottles give a bit of an issue (I.E. laguntias, anchor steam, etc.). Even with these, I alternate the pattern of putting them into the trays. They will fit, but not next to each other

Highly Recommended

I bought two of these for beer bottle drying and storage. I was able to stack them on top of each other (four full racks high) with no fear that they would topple. They're sturdy, and I have a feeling that I could go as high as six racks without a problem. The plastic is smooth, so I don't worry that any water or bacteria would get stuck anywhere, so I trust that these are clean. The bottles dry quickly and the inside stays clean due to the upside down nature of the rack.

Time and space saver!

My fiancé and I brew mead. We're using it for our wedding favors this October. Washing 150+ bottles is tedious! This made things go SO much smoother. Bottles were washed first thing and were dried by the time we went to bottle, just a few tiny drops on the bottom of the bottle (the outside, the bottles dry upside down) and a bit more on the bottles on the bottom, but wipe it off. Simple!

works great!!

I bought this drying rack for my wife who has been bottling her own Kombucha for a couple of years now. She uses the flip top type bottle for brewing and has been wanting to try this rack. After it arrived she unpackaged it and was happy with it. After the first use she was absolutely thrilled with this. It drys the bottles very evenly and holds the flip top bottles without any issues. The flip top bottles are pretty big so she has split the rack instead of stacking it but it works great. If you are reusing any kind of bottles and want to keep them stable after washing them so they can dry evenly then this is the rack for you.

Everything I Needed In A Single Kit

I just needed to start with 2 racks and a drip tray, so this covered my needs perfectly. I prefer this design over the bottle tree as nothing touches in the inside of the bottles when placed upside down to drain. In the near future, I will likely order a few more racks for stacking as I expand my brewing.

Works perfect if you have standardized your bottle collection

I like this product. It takes up much less space and is more stable then a bottle tree. I use ONLY 12 ounce long neck bottles which work perfectly in this product. This product might not work as well for somebody who wants to bottle into an eclectic collection of bottles because the trays might not stack properly. Shorter bottles would be OK as long as you had all shorties or at least one long neck at each corner. Bigger bottles would work but they would not make efficient use of the provided holes. Think about your bottling needs. If you are like me you will like this product but other folks might be better off with a bottle tree.

I love these things

I love these things! I kept trying to dry 100 glass bottles upside down on towels....a delicate balancing act. The plastic bottles acted like bowling pins and would go everywhere. Not with the bottle dryer! And I was expecting these racks to take up more room, but they're a perfect size to tuck away when I'm not using them. I'm probably going to get a couple more, some day soon.

Great product

These work great. Bottles dry and stay clean while bottling. Less touching and less chance of contamination. And great for storage till ready to use again.

Full Reviews