- THE ORIGINAL PUZZLE SAVER – Made in the USA Since 2007 by Premium Puzzle Manufacturer, Buffalo Games. This is a Product Made by Puzzle Enthusiasts for Puzzle Enthusiasts.
- PERMANENTLY PRESERVE YOUR PUZZLE IN ITS ORIGINAL PRISTINE FINISH – Quick and Easy with No Messy Clean Up!
- EASY AND EFFECTIVE APPLICATION – Simply Peel the Backing from The Adhesive Sheets and Stick to the Back of Your Finished Puzzle. That’s It… Your Masterpiece is Saved! No Mess and Takes Only Minutes.
- INCLUDES SELF ADHESIVE HANGERS – Show Off Your Finished Piece with Convenient Self-Adhesive Hangers That Allow You to Display Your Puzzle on the Wall.
- COMPATIBLE WITH ANY PUZZLE PIECE COUNT – Includes 6 Large Adhesive Sheets Covering a Footprint Up to 29 Inches by 21.5 Inches!
-
Information
-
Twitter
-
Pinterest
-
Youtube
-
Facebook
Misty Rene Freudenberg
No Mess, Strong Enough for Framed Puzzle
Works well without the mess of glue. It's a strong adhesive that is easy to put onto the back of your puzzle. Slide your puzzle onto a piece of cardboard, clamp another on top with large binder clips, flip it over, and put the stickers on. I used it for a 20x27" puzzle that I later framed and it worked fine.
Rebel Jutt
Easy, Peezy Puzzle Adhesive
This works! I was able to hold my puzzle up and even put it in a frame for a gift. The trick is to make sure you press down on every sheet when applying the adhesive. When turning the puzzle over - the best way is to put another cardboard piece on top of it, binder clip all four sides and then flip easily.
David Hiner
Great, Easy To Use Product.
I used this product for the first time. All went perfectly. Simply follow the directions. Roll over each piece as you install it, then roll again when application is finished. Let it sit with some heavy books or such on it for an hour or two. I applied the backing and used the enclosed hanger. It looks great on the wall, with no warping or dropped pieces. UPDATE: I have mounted 4 puzzles using this product....all are hanging on the wall perfectly.
Jerry Wickizer
Great simple product to save your precious work!
I bought their 1000 piece puzzle Buffalo Games Photomosaic: Tiger - 1000 Piece Jigsaw Puzzle by Buffalo Games and finished it after a long week (woot!), but wanted to save my prized work. I tried to frame the puzzle, but it kept falling apart and originally I wanted to use glue to stick it all together (that didn't work either). Then I realized the puzzle I got came with a promo card about their stick and peel puzzle saver on Amazon. I decided to take the risk and purchased the product. It came with three large pieces to cover the puzzle. You can cut the pieces to fit your puzzle if it's smaller. I had to cut a few inches off to have it fit my 1000 piece puzzle. The end result was great! The product is a huge sticker (literally) that you peel to save your puzzle. It's an overall great product and price. Definitely recommend! Like our review?[...] ave us a comment if you have any questions or send us an email. We're here to provide our honest feedback and information on products we've tried and tested. Thanks for reading!
Anivon Zerimar
Take Five Review - Awesome Product !
I have used puzzle glue in the past, but the Puzzle Presto Peel and Stick Puzzle Saver is by far the BEST solution to preserve your puzzle. Unlike other reviews, I did not have any issues with pieces falling off due to poor adhesion. Follow the instructions! Use a rolling pin and go over the back of the puzzle to ensure complete adhesion. Also, leave the puzzle undisturbed for several days before displaying it. Below are 5 take-aways that I hope you find useful! 1. I have used other sticky paper puzzle saver products, but found that this one made by Buffalo was superior. Others were better priced, but the paper backing was thinner. I prefer paying a little more for a more ridged final product. 2. I have used this product to preserve 8 puzzles to date and have not experience any issues with the backing sticking to the adhesive. Use the perforations provided and pull slowly. 3. They recommend cutting the sheets so that that the seams overlap slightly. I chose to use the full sheets instead of cutting them and found no issues with larger overlaps. In fact, it might of made the puzzle even more firm in the end. 4. I did not use the provided hangers, so I have not insight into how well they work. Instead, I prefer to enclose my puzzle in a frame with glass. This will not only protect the final product from damage, but it makes it much easier to dust. 5. I found that it was easy to flip your puzzle over if you build it on a scrap piece of drywall. Use another scrap piece when completed to put on top and then flip it over. Some people recommend sandwiching your puzzle between two pieces of cardboard, but I found that drywall was much easier since cardboard tends to bend and flex.
Marvin Lidel Obeñita
Clean, Quick & Easy - love the cut-to-fit feature!
I thought I would have to mess with glue or pasting something OVER the puzzle pieces - but with Peel & Stick all I did was flip the puzzle over - (would have helped to get instructions on the flipping aspect - hint, I slid it on a bread board then put a large cutting board on top and flipped it over so the backside was up) - then cut the peel & stick paper to measure and it stuck perfectly to hold the pieces in place...I had to cut a few pieces to get full coverage but it was easy - I think it even had grid lines to follow. I used a rolling pin to press down evenly then...done! Within 30 seconds I was able to lift the now one-piece puzzle by the top and carry it to a safe place for framing later - really appreciated that 1) it was easy and quick and 2) that I didn't have to destroy the look of the puzzle pieces by spreading goop over them...yay!
Gail Conley
Like a dream come true - perfectly preserved puzzle within a couple minutes.
Bought this for my 12-year-old daughter for a 500 piece puzzle we built. Like a dream come true, you can have a perfectly preserved puzzle within a couple minutes, no worries that all the hard work you put into the puzzle can be undone. Her's was a 3D Visual Echo puzzle with hot air balloons, I hated to have her put glue anywhere around the textured surface because even it a little got on it the beautiful effect would be spoiled. She was able to simply peel and stick 3 pieces of this (half the package) to the back of her puzzle and now can frame it to hang on her wall. Still stunned at how quick and easy it was and ZERO mess, As a mom the no mess was my favorite part!!! Definitely worth buying should work for any puzzle. If it didn't fit your puzzle it would be easy to cut some off or add more. I plan to buy more for the 1000 piece puzzle my 15-year-old is building. I don't want any glue on her surfaces since she needs her colored pencils to work on them. Believe me, this kit beats glue any day!! VERY pleased and plan to order another right after I complete this review. If this review is helpful in any way, please give it a thumbs up below. I do these reviews to try to aid you in your purchases because I sure appreciate the reviews left by others. Thank you for your support. Edited to Add that I did re-order and now have "stickered" another puzzle, see 2nd photo of it, it is the color it yourself puzzle with the peacock.
Tammy Jane Cunningham
Easy!
My hilarious family members got me a 1000 piece puzzle of New Era Field. I got them back by ignoring all my household duties until I had the puzzle completed. I couldn't bring myself to put all that hard work back into the box, so I got this product. It was very simple to use these. Flipping the puzzle over is the hardest part. It comes with little hangers but I took mine in to Hobby Lobby and had it mounted to a board and framed. Take that, practical joking present giving family members!
Marvin Baluyot Velarde
Awesome Product, Exactly as Advertised
I LOVE this. It’s kind of like taping the back of your puzzle I guess, but it makes it super easy and way cleaner than using glue. I used this on several 500 piece puzzles, there is PLENTY for most puzzles. I didn’t do a super big 1000 piece puzzle or anything, but it will probably depend on the manufacturer and size they chose etc. my 500 piece puzzles are of various sizes, some are relatively small, some are HUGE and take up 3 of my smaller 500 piece puzzles... the main thing this advertises is that it will make preserving your puzzle easy and it does that 100%. My only complaint will be that this perfectly preserves the puzzle together similar to tape however, it doesn’t keep the puzzle “straight.” The puzzle is pretty bendy and you’d want to frame it to keep it perfectly straight. If this had a thicker cardboard backing or something similar that would make it even better. However, it did what I wanted it to do perfectly and highly recommend it do anyone else ! Thank you for the awesome product :) P.S. for any puzzle enthusiasts who may want a budget version, there is really no big advantage to this over duct tape. I plan to use these anyway as I purchased quite a few, but for anyone else.. just know it’s an option that will do the same thing.
Sarah Sylvester
Lifesaver
It took a over a month for me to finish a 1000 piece Starry Night puzzle and following the "experts" advice I used puzzle glue on the front and planned to mount it on a foam board to display. The glue warped the puzzle, pieces fell off and the puzzle had an ugly film over it. I spent a few hours scraping off what I could with a credit card. I wasn't sure what I was going to do. After searching for help, I decided to try Puzzle Presto, I taped the front of the puzzle with painters tape so I could flip it over and applied the sticky sheets according to the directions. The puzzle is stuck together nicely and I'm going to frame it in a normal frame. I would not recommend using this and trying to mount it to a board because I don't think it's stiff enough, however, mounting in a frame should work fine. I will never mess up a puzzle with glue again and would rather have to restick some pieces if they fall off than to ruin a puzzle.