Features:

  • 1 KG (approximately 2.20 lbs) Spool
  • 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm)
  • PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant
  • Recommended Extrusion/Nozzle Temperature 180°C - 210°C (356°F - 410°F)
  • Spool Diameter: 8" - Spool Width: 2.50" - Spool Hub Hole Diameter: 1.25"
Works Great!

Good quality filament. Have used a lot of filament and this has been a very good quality one. Bought the 1.75mm and with digital caliper was getting readings from 1.72mm-1.75mm (well within the advertised accuracy) when intermittently testing different areas of the roll. Have purchased three different colors of the same brand, type and size and all have been about the same dimensionally.

Good choice of filament for your 3D printing...

I got a 3D printer (Dream Maker Overlord Pro) just over 1 week ago and have been printing ever since. This will be my second roll of PLA I've tried. The color is vibrant and bright and it put some shiny touch to end product. You can't tell it's printed in layers, it's very smooth and all the edges look sharp. That's the way I like it. Its adhesion to the print bed is excellent, need to twist harder to get it off. This reel is a little bit wider compared to the one I currently have. Have to put it in an angle due to other components around it, just a minor problem. I'll order some more soon. Really recommend it.

Solid filament. No issues at all so far.

No binding or jamming. I have not had a single issue. Extrudes very well. I run my nozzle temp at 200 and bed at 60 and haven't had an issue. This is good for lightweight and fairly durable parts, depending on your fill %. Not expensive and is a reliable product. Love the color choices from Hatchbox! Getting Glow-In-The-Dark next! I guess i'm beginning to be biased. I don't even waste time looking at other filaments.

Great Filament

This filament works great. No issues, it just works! I tried three different spools of Gizmo Dorks and what a disaster. Just load the Hatchbox yellow PLA and no problems. I just wish they sold smaller spools to try different colors.

Prints flawlessly

Filament works great. The prints are smooth. No issues with extrusion - the diameter is consistent, yellow color is vivid and does not change during printing. Highly recommended. I wish it was a few dollars cheaper (a few other filaments out there are just as great, but slightly cheaper). Still, I will buy in the future. fyi: 195/60 for my machine.

The Gold Standard for Tangle Free Winding

This is my first experience with Hatchbox filament and I am extremely impressed. To me, the main things I look for in filament are size consistency and tangle-free winding. The size consistency is great and the winding is phenomenal. I’ve bought dozens of spools of filament from different brands over the years, and this is the first time I’ve opened a filament spool and saw such perfectly wound filament. The picture I posted with this review says it all. It’s the kind of filament that helps you sleep well knowing that your print job will be completed problem-free in the morning. I’ll definitely be buying more Hatchbox!

Such a beautiful yellow; layer lines disappear for some reason!

I used this to print an ergonomic keyboard case (photos uploaded) and I'm just so happy with the results. Hatchbox never disappoints. It melted well at temps between 180 and 210, in that relatively wide range it was well behaved too! Stringing was minimal, but did occur nearer to the higher temps (that's to be expected); even at the cooler temps it was flowing and behaving predictably; I really have enjoyed using Hatchbox filaments over the years.

Please don't buy cheap ebay stuff, Just start here.

Wish I would have listened and bought this when I first got my printer. I tried cheaper stuff at first and thought there was something wrong with my printer. After prime day came and went I had a few cash back credits on my card and decided it was time to give this a go. BEST DECISION YET. I have since bought more colors to print with. No clicking, smooth flow, nice finish.

Very bright

Very god filament, used this for my first print and loved it. It might just be my eyes, but it was difficult to make out some details with my it. But it made very strong prints with out problems. I used a heated bed with glue stick and it held strong. 210 for extruder and 50 for first 3 Layers then down to 40 for the rest. All temps I Celsius

Quality Plastic

The first reel I bought with my printer. Used a lot of it just calibrating. What I've learned, atleast from this brand as it's all I've bought and used, is that all colors are not created equal, meaning I get better quality and bed adhesion with some colors versus others, and yellow is one of the best colors I've used. And depending on the spool, I either measure 1.75 or 1.74mm diameter, but it's consistent throughout the entire spool, so software can adjust for the size and makes the issue neglible. Keep in mind, even the worst colors I've used function perfectly fine, just a bit touchy. Overall, great product.

Full Reviews