Features:

  • Manual 5 Speed Car Shift knob Type-R Style design for a comfortable grip
  • Race Auto Shift Knob Made of High quality aluminum with black finish and red letters for a performance look
  • Shift knob Kits Fits thread size: M10x1.5 with adapter nuts for Honda and Acura cars
  • High quality Gear manual stick shift knob,All vehicles with 10mm x 1.5 threaded shifter
  • shift knob Fit for most Honda and Acura ACCORD CIVIC INTEGRA PRELUDE CRX RSX NSX S2000 FD2 CR-Z TL RL B16 B18 AP EF EG EJ EK EM DC DA FA FD FG ITR CTR S2K K20 K24
Great Shift Knob

This shift knob was a great addition to my 2002 Mazda Protege. They did send me the wrong thread pattern, but I just ordered another one in a different color so now I have 2. They use the same adapter so they're interchangeable. The Mazda Protege uses M10 - 1.25 not the M10 - 1.50 I went ahead and change to my original shifter to a short throw shifter and when I replaced that the shift knob that it originally came with was too light. It made it really hard to shift gears. I decided to buy a weighted shift knob. It makes a world of difference. The original shifter had a counterweight at the top to make it easier to shift. The short throw shifter doesn't so you have to add a heavier shift knob to counter it. This one is cheap, looks good, feels great, & matches my car perfectly. Aside from originally receiving the wrong size thread originally, it's an amazing Shift knob at an excellent price.

Great looking and feeling shift knob.

I bought this to replace the shift knob in my Kia. It was a round plastic thing, and it broke apart. This looked interesting, so I thought I would give it a try. It fit just fine, and the narrow shape of the shift knob feels nice in the hand. it does it warm (and cold) depending on the temperature in the car. At times it is very hot to the touch, however it's not really an issue as when you shift it's done so quickly I never feel discomfort. Now if I just grab ahold of it and leave my hand on it, yes it will be unpleasant, but who does that? It looks nice, feels nice, and I doubt it will ever break.

Perfect fit and looks good on the civic si 2002 model.

Replaced my stock shifter on my 2002 civic SI aka the ep3 model. I purchased the car used and the original stock shifter didnt age too well it was cracked on top and looked as if whatever gel was cracking. This replacement on the car was a tiny bit shorter than the original so you see some metal not covered by the shift boot. But overall its so minimal. Feels a tiny bit heavier than the original and feels the quality is pretty well made. Pros: Shiny metallic red with white numbers. Ill update this if it begins to fade out (knob or numbers). Easy install on the ep3 literally just unscrew the original and screw this in. They added an additional screw i believe this might be an adapter. But the long black stock adapter that was already inside worked well and sits snug. The knob does not spin off. Feels heavier. Cons: Lining up the numbers took me a while i kept screwing it on multiple times for a few minutes trying to figure out why it kept stopping sitting upside down. If you habe an issue with this. Heres what i did. Twist it tighter till its lined up. I felt it was already too snug, but actually needed to tighten it a little more. Also adding tissue to the inside of it little by little and trying multiple times until it lines up helped alot to line up the numbers on top.

Works good on a 2003 Jeep Wrangler TJ

I know it's labeled for a Honda or Acura but it works well on a Jeep Wrangler too as it uses the same size thread! It screwed on all the way till it bottomed out and stopped in perfect position! Just what I needed to replace the old "universal" gear shift someone had put on.

Fits my Fit

It was difficult to find a shift knob that wasn't a universal fit. This fits my 2009 honda fit perfectly. It's a little small and it's metal, so it's freezing in the winter and scorching in the summer, but just throw a mitten over it and you're good to go. For the price I def can't complain.

Fit my 2000 civic well.

This shift knob was a nice replacement for my 2000 civic. I didnt use the silver nut at all. I just tightened the threaded reducer on to the shifter and the screwed the knob on. The knob threads were tight enough to keep it from spinning while driving.

feels great when shifting...

Great product, easy to put on depending on your car. Works well to install onto my 2015 Honda Civc sedan shifter. However, there will be a gap between the shift boot and this shifter, so you will have to come up with ways to eliminate that if it bothers you, otherwise, leave that gap and the shifting is solid!

Slippery but comfortable

I probably messed up the installation or its just made so well that the adapter isn't going to loosen up. The shifter is slightly smaller than the one that came with my honda fit and took a week to get used to the feel of it. It's slippery and will get burning hot in the summer and ice cold in the winter but I wouldn't have it any other way.

Looks and feels great on my 89 Honda Prelude

Upgrade from the old original shift knob. Includes a bolt to hold it in place and centered. Feels great when shifting gears. Once i installed it, it has not shifted from position, really sturdy. I would definitely recommend it to anyone.

Perfect standard look.

It feels great not like some cheap imitations. Gave it that little bit extra look I was looking for. I like original look with power and this was the added touch..

Full Reviews