• Fit for iPad models: A1395/A1396/A1397/A1416/A1430/A1403/A1458/A1459/A1460. Note: for earliest editions of Apple iPad: iPad 2/3/4 9.7". NOT for later iPad such as iPad Mini, iPad Air, iPad Pro, NOT for newest 2017 iPad 9.7"
  • Extremely high hardness: resists scratches up to 9H (harder than a knife)
  • High-response and high-transparency
  • Dust-free, fingerprint-free, one-push super easy installation, bubble free.
  • Retail package includes: 1-Pack tempered glass screen protector, cleaning cloth, dust removal stick, guide stick, instructions, life-time warranty card

I purchased three of these screen protectors. One of them was for an IPad screen that had cracked on one edge. This screen protector did nor work for that IPad as there were missing glass pieces. The screen protector will not adhere properly if there are pieces of glass shreds missing! So then, I tried it next on an iPad with a perfect screen and the screen protector worked like a charm! You do have to follow instructions and clean the screen really well. First with the included cloth and then with the sticky blue film. Then you peel the protective layer off the screen and place it with the help of the two included tabs and voila! You have a perfectly laid out screen protector! It really looks good and you hardly notice it. The iPad works perfectly with it on. This was much easier to install than a protective film. No bubbles! Save the blue sticky film till you have laid down the protective film as it will not adhere properlyif there is even one speck of dust on it. The good part is that the film can be lifted, the specks lifted off and the film replaced as many times as you want! But, it is better to just clean it thoroughly the first time and place the protective film!

I'm very satisfied with this purchase at this point. Delivery was on-time, packaging appropriate, etc. Although installation of screen protectors isn't exactly brain surgery, the first time you apply one, it's nice to have concise, accurate instructions and tips/hints. I give JETech high marks in this area. The directions were clear and simple to follow, with no spelling or grammar errors, and no head-scratching 'Huh?' moments inspired by ambiguous or missing steps. Basically, I did what it said and the screen protector went on easily, first time, and there were no bubbles or dust trapped beneath the glass when I was finished. This is a big improvement over the far more expensive old-style plastic protector that's been on my 3rd generation iPad until now. The glass is VERY transparent and smooth to the touch. My fingers glide very easily across the surface and touch sensitivity/responsiveness is great. Fingerprints wipe off very easily. So far, I couldn't be happier!

I've always put screen protectors on my phones and tablets to keep the "glass" clean and scratch free (yes, they do scratch and fade...). I keep these a LONG time and I like to keep them as near to new as possible. When I upgraded to an iPhone 6S, I got the JETech glass screen protector. It was very easy to put on AS LONG AS YOU ARE VERY CAREFUL TO ENSURE THAT NO DUST PARTICLE IS ON THE SCREEN BEFORE "LAYING" THE GLASS ON!!! JETech provides a little sticky paper that I highly recommend using to do this. It really gets the most minute dust (which you WILL see if you don't remove it). As many have pointed out, lay out a clean area with space to work, make sure your hands are grease and dirt free. Lining up the screen is the hard part (for me) and once that backing sheet is off you have to be careful how you handle the screen so that IT doesn't get dust on the sticky side before applying. The next hardest part is getting the "bubbles" out - applying pressure with a microfiber small towel and "pushing" them to the sides works, but takes a little effort. That being said, once these are on the tablet/phone, they look fantastic! MUCH better than the screen protectors I have used in the past. My iPad was 4 years old and removing the old plastic screen protector was very easy: it just peeled right off. The screen display itself was still in good shape and to my surprise wasn't sticky. I have not noticed any degradation of sensitivity using the touch screen. I highly recommend these new generation "glass" protectors.

I used it with an iPad3 that i dropped and shattered about an inch of the screen in one corner. The shattered portion is the black surround so it didn't really affect using the iPad but i wanted to be able to clean the screen and use it without breaking the glass more. Packaging is great. As long as it doesn't change i can't see anyway it could show up damaged from delivery. For those that dont know the screen isn't flimsy so its easier (my opinion) to work with vs the thin screen protectors you might have seen in the past. It sticks down easily with no air bubbles as long as you start from one end and work your way to the other. You can easily lift up and start over if you have a problem. I used the included microfiber cloth to push down as i applied it this made squeezing out air bubbles very easy. The attached photo shows the shattered section of the iPad screen. The screen protector is installed. You can see how clear it is and now the complete iPad screen surface is safe and easy to clean again.

I was very impressed with this screen protector for the price. Installation was a breeze although I must admit I was concerned when I put it on and there were two very large bubbles in the center of the screen. With little pressure these bubbles subsided and it is perfectly clear now. Appears sturdy and plenty thick to provide adequate protection from scratches. I do notice that finger prints and smears seem to build up rather quickly, but are easily wiped away.

I'm so tired of reading feedback where the product was rated a"1" when the writer is unhappy about the shipping time or the product may have been damaged in shipping. I have been buying on Amazon for some 16 years and have yet had to wrie a "1" review. You do have to use common sense, if a deal looks to be too good to be true, i.e. A $100 item selling for $13.55 is probably not the real deal to buy into. Now, down to realities. It is easy to mess up the installation of a screen protector, I have done it on occasion, but, I don't write a review trashing the seller - I messed up, my bad... not the seller. Unfortunately, there are many Amazon buyers whose egos are much larger than their integrity and they trash the seller rather than admit that they were incompetent. So be it. However I have bought and installed JETEch glass screen protectors with no problems and it is my protector of choice. I am 71, and many of my friends are my age and they come to me for help with this 'techie' stuff - like installing screen savers as I'm a system engineer so I guess that means I should know about these complex issues. So, for what its worth, I have found JETech easy to install, the few bubbles are very easy to remove, and the sceen is quite easy to keep clean. It is for these reasons I use this product, recommend it and rate it a '5'

Looks amazing -- almost as if it isn't there. There are no bubbles. I cleaned my screen by pouring a tiny bit of alcohol on a paper towel. I wiped the screen really good to get all the fingerprints and oil off. I dried it with the lint-free cloth they included. They also include a blue sticky film; I used that to remove all remaining specks of dust. They also include tabs to attach to the glass to so you can hold the glass right over the correct spot... then plop it right on. Just let gravity take over. It suctions itself right on top of your screen. Easy as pie. Much easier than a traditional screen protector, and of course, it provides much more protection for your ipad. I have Ipad 4 with Retina display. I picked this product over the others that stated in their description that their glass was not shaped to cover the rounded edges of the ipad. This one did, perfectly. I used this in conjunction with a discounted case from Amazon Warehouse Deals ZOOGUE Case Genius Pro iPad 4, iPad 3 and iPad 2 Case - Leather Case Cover and Flip Stand with Elastic Hand Strap and Premium Micro Fiber Interior. Automatically Wakes and Puts the iPad 4, 3 & 2 to Sleep (BLACK) and I absolutely couldn't be happier.

My son has autism and is very abusive with his iPad sometimes. We've been through several iPads before I thought to try a tempered glass screen guard. This thing is AMAZING! My son beat the snot out of his iPad last week(rough week) and there were cracks all over the screen. I was actually afraid of what I might find once I took the JETech off the iPad. The screen was in perfect condition. There was a bit of residue that require a more thorough cleaning, but it came off nicely. I reinstalled a new JETech screen guard, because yeah, this is how we're rolling from now on. Now I'm going to go buy one for his Mini. I LOVE these things!!

Ordered this on November 30, 2017. Easy install if you follow the directions. Was installed on my iPad 4th generation in a Griffin case. Touch functions work well through this and the screen is easy to keep clean. Sometime in April I noticed a crack had developed in this product. I'm not sure how it became cracked as the iPad wasn't dropped and nothing of significant mass was set in it. I initially looked at purchasing a crack-resistant screen protector but they all seem to scratch up as they are manufactured from a poly-plastic material. I decided to purchase a glass protector instead of a plastic one. I recalled one of the main reasons I had bought this particular glass screen protector was because of the claimed Lifetime Warranty. Well, I contacted the seller through Amazon messages who responded a day later to confirm my shipping address. Within a week I had a new one! So, I figured I might as well type up a review. If I need a protector for any of our other mobile devises I will definitely consider using this brand and seller.

My iPad had been dropped and the side is shattered. Slivers of glass keep coming off, even after I used a vaccuum hose on it. I cleaned it with the wet wipes, cloth, and sticky thing provided and applied the protector. It was insanely easy. I had some major bubbles on the damaged zones (not surprised, they are pretty darn bad) and even using the stiff card thing to push them out, they just wouldn't budge. The next day the bubbles had worked themselves out on their own and now it looks better than I could have hoped. The shards don't move at all and it feels like it's never been broken. I have a child friendly case on it now, and feel confident that my two year old can use it safely. The screen protector is completely clear, like it isn't even there, and it doesn't effect the touch sensitivity at all. I couldn't be happier. I wasn't too careful in making sure it was placed 100% right on the camera hole and button hole because I was more concerned with covering those shards, so I'm sure someone who cared could easily do a better job. If you mess up, it's really really easy to just pull back up and adjust it. It sticks firmly in place (almost like it's stuck partly by the stickyness and partly by suction) but if you break the seal and pull it up, it comes up without a problem. I serously couldn't have asked for a better solution to my problem. I highly reccomend.