Features:

  • Adjustable Foam Lance, foam cannon with 1/4" quick disconnection fitting, 33 OZ (1 litre) container bottle
  • Requires Pressure Washer to Have 2.0GPM & Over 1000 PSI Pressure for use
  • All the connectors are made of quality brass
  • Variable, adjustable Spray Nozzle for accurate mixing and foam generation
  • New Heavy Duty Design, ideal for enthusiast or professional use
Just do it!

I have black car and cannot stand the swirl marks cleaning it ciases no matter what method I use, two bucket, leaf blower dry etc. This was amazing, it flooded it with suds, I power washed off only used one cleaning mitt and dried in 20 minutes. It was fast and worked as all others said. I used chemical brothers soap filled about 4 inches added a bit of water to dilute and there were more than enough suds for 2 cars. Easy to dial up or back. It looks ok when it arrives,little directions but it is so easy to use and it does what I was expecting. I have so many car cleaning related products, can't believe I didn't own one of these for the last 20 years, toss the buckets, get this and washing is so much easier

First and hopefully last soap cannon

Since I've received this soap cannon, I've been finding excuses to use it. Setup is simple, like if you're one of those "I dont need instructions" type of people, this is perfect for you. I've washed my truck several times already, my parents vehicles, neighbors, even used it at the fire department. The bottle can empty fast or slow it depends on your preference for the dial on top. I have it all the way shut for thicker soap and a full bottle (top line not 100% full) has lasted me 3 vehicles, one of them was a work truck. I use this with the greenworks 1950psi pressure washer and I can honestly say that I went out on a limb without ever using a soap cannon and went for this one. The soap gets layered on nice and even and thick, and it looks better than it did when I hand washed. I would definitely buy again and recommend to friends so far.

Does the job, decent quality

First time I used this I was not using a high foaming car wash soap (some cheap thin stuff) so I didn't expect much. Still did a decent job. Second go round with a high foaming soap - wow it really foams up the vehicle. I was cleaning a black vehicle driven into a muddy field, splashed with muddy water that dried on so I did not expect a hands off wash. What I wanted was something to loosen dried on dirt before wiping down the paint. This does the job - based on how heavy the brass top is I can see where the bottle can be damaged - I am going to handle carefully or will replace the bottle if it breaks. I am using with a 2700 psi gas pressure washer - it has a full lance so it is a heavy hanging out on the end. I am going to change the gun assembly or setup a second gun with quick disconnects from the hose. All in all I am impressed. Been looking for a better way to wash a car - especially my Miata, this is going to be just the ticket. I like the noozle adustment range - might be handy for washing equipment at work (combines, tractors, semi's etc). So if you are on the fence about trying a foam cannon give this one a try. Having not used the more expensive models I cannot comment on the ultimate quality differences but if you want something that cover a car in foam this one works. Just be sure to use a high foam type car wash - Meguire's/Mothers Gold or Pink worked great.

Works great with Ryobi

Since I was on my fence about how effective this would be, I wanted to let people know it works great with my Ryobi 1600psi 1.2 gpm washer. Followed the advice of another reviewer and used about 2 ounces of Mr. Pink, filled the bottle with warm water, then attached to pressure washer. Thick, shaving cream-like foam on mt first use. It went through it very fast so I probably need to adjust the knob, but overall very impressed. Left my very dirty black car shiny clean. Buy it. You won't regret it. I will update this if it falls apart on me, but it seems to be very well made for a $20 product.

THIS FOAM CANNON IS SO COOL

This thing works great. Covers the whole truck in foam in about 45 seconds. I bought a gallon of Chemical Guys CWS_110 Honeydew Snow Foam Car Wash Soap and Cleanser (1 Gal) and filled the foam cannon bottle about half full believing it would probably go through a lot of the soap quickly being blown out by a 3000psi pressure washer. Wrong ! It barely uses any of the soap at all to cover the whole truck. That gallon of soap is gooing to last me a long, long time. The neighbors saw me using it the first time and came outside to watch - it was so cool. Everybody wants one now. Here's what I did: used the pressure sprayer to knock off most the dirt and sand off the truck. Then hook up the foam cannon and spray the whole vehicle. I then used a sponge to scrub the truck to get off the bugs and tar and stuff, then unhook the foam cannon, and use the pressure sprayer to rinse everything off. Cut an hour off the cleaning time. No need for a bucket. I'm 100% completely happy. And the truck smells like a big Honey Dew Melon. I'm good.

this thing is amazing. My grandma has never had a bath like ...

Don't let the price fool you....this thing is amazing. My grandma has never had a bath like this. I just put her out in the driveway, get the pressure washer going, and this foams her right up without me having to use the sponge. 10/10 would buy again.

Works great for foaming and other applications!!

Have used this the past few months for washing my cars and I have to say it's been working great. The construction of the nozzle is pretty rugged and hefty. It produces foam at a decent rate (heavily dependent on how much soap you add). Obviously the more soap the more foam it produces. One thing a lot of people assume is that you can only use soap. I have used different cleaning chemicals in the bottle with no issues. Main reason is that using this with my pressure washer allows me to spray the cleaning chemicals much further than any garden hose I have. This allows me to get up to the second story of my house with no issues. Another assumption that people have is that this is a "foaming" device. FYI.....this doesn't "foam" up wherever is in the bottle.....unless what you put in the bottle creates foam when mixed with high pressure water!!! Example: having only water in the bottle obviously won't create "foamy" water!!! One thing to keep in mind is that since the nozzle is pretty hefty, the entire bottle with the nozzle attached is top heavy.....especially if the bottle is empty or has very little liquid inside. Overall I would recommend purchasing this instead of buying the more expensive brands. One thing that most people complain about are leaks. I didn't have any issues with leaks, but I didn't over tighten the bottle either. Finger tight is about as much force you need. If you over torque it, you run the chance of breaking off the bottle top.

Full Reviews