Features:

  • Partsam (2 x Amber) 6LED, 6-5050-SMD 4" motorcycle led turn signal strip with 120CM extension wire, 12V.
  • Flexible Turn Signal Strips Indicator Blinker Light Universal for motorcycles and scooters; Lot of Common uses. Motorcycle License Plate Blinker Light, Car License Plate Light, Trailer lights.
  • Light up an amber ( orange ) color similar to most motorcycle bikes stock signals; Front and rear signals on any size and style of 12V motorcycles Vehicles.
  • Size: 100mm x 10mm x 4mm (4'' x 0.4'' x 0.15''); Wire Length: 1200mm (47 inches).
  • EASY TO INSTALL: 2 Wires Connection: Black is Negative and Red is Positive.Note:you need to connect it to the relay then it could blink!
Perfect for my Harley Street Bob

I use this product as my turn signals mounted to my Harley Davidson Street Bob, they are very low profile and fitted to the rear view mirror cover. Super bright and I got rid of the ugly handlebar turn signals. Perfect for what I wanted (the low profile look of a bob) - have bought another set as I was so impressed.

Best LED blinker strips for the price!

These LED strips are a very bright amber and extremely visible. Holding up a 100w light bulb to the LED's was insufficient to fade the LED's light output. At $10.29 for 2, these LED's are an extremely good deal. These are virtually invisible mounted on the rider peg mounts, but clearly visible once the turn signals are activated, and are even visible from the sides of the bike. The 3M adhesive strips on the LED's are extremely sticky and a little hard to pull off the red protective backing, but once the backing is off, it'll stay where you put it. Yes, these are as bright as the picture indicates. I highly recommend buying these for value and price. I may post a followup review later on after I've been using the bike as to longevity and durability.

The Perfect LED Turn Signals on my Motorcycle!

I picked these up to replace the LED strips that were being used as rear turn signals on my 2004 Yamaha R6. The previous owner added a Fender Eliminator Kit to the bike, and when he did so, used LED strips like these for the turn signals. The problem is that he used red, so when the brake is applied, the red from the brake light drowns the red from the turn signals and you can't see that it's even on... These, work perfectly! They're amber in color, so you can see them even when the brake light is on, and they're bright enough at any time of the day or the night to be easily visible. So far, they haven't even come close to starting to unstick from my fairings, and I don't see that happening anytime soon, honestly. For use as turn signals on the back of a motorcycle, I'd say these are perfect!

Only complaint.

First off these are awesome. Very low profile. Appear to be great quality. SUPER BRIGHT. Sticks where you put them. I haven't had them long so I will update if I have issues. My ONLY complaint is that I wish they were smoked so you cant see the inner LEDs or electronics. Makes it a little cheesy. It would be much cleaner if you just saw a black strip. However, you get exactly what is pictured and I knew what I was buying so I can't knock them for that. I just wish I did a little more digging for a smoked cleaner version. I don't plan on changing them because they are already hardly noticeable. If you like the look buy them. You won't be disappointed. If you are picky about a clean line then find a smoked version.

Perfect

These are perfect to wrap around the forks. They are thin, lightweight, and very simple. The product quality seems good. I ordered 2 pairs of these, two for the forks and two for the rear. They light up nicely. Also needed 4 resistors to stop the hyper blink, Amazon sells a pack of 4. All in all, it makes the bike look much cleaner without big blinkers. I would definitely recommend these to a friend.

A great add-on light for saftey!

Great addition to running lights or replacement for your bike, scooter etc... I wanted a bit of added saftey as just one front and rear light does not set well with me at night. I'm so happy i found these they blend in so well, and yes they are bright even in daylight!

Great light for minimalist build. mount them anywhere!

These LED lights are incredibly bright when lit, and disappear when off. They are exactly what i was looking for to complete my Honda Shadow minimalist build. These are MUCH brighter than my stock blinkers and the mounting options are only limited by your creativity. The backing adheres wonderfully yet can be removed without much fuss. I did have to relocate one light (my own fault) which did not mount as securely so be sure to stick the light correctly the 1st time or you may have to remove and replace the 2 sided 3m tape.

excellent product at a cant lose price

these lights are extremely bright and installed in 10 minutes with soldering and heat shrink time included. these use the red 3m tape backing just apply to a clean surface and they will stay there till you decide to remove them. the wires are very thin so id heat shrink over your install for added strength. excellent product at a cant lose price. these went on a 94 fxsts that i added hard bags to. i kept breaking stock lens covers from the vibration of the turn signals mounted to the softail relocation bracket. no issue with these, they are only maybe 2 oz each with the wire. i placed them just below the saddle bag lid and ran the wire aroumd to the mount and under the fender picking up the single wire for the hot lead then put a round fitting on the ground and bolted it to the fender strut. works like a charm.

provides the safety and visibility old people demand!

I wrapped these around the lower triple clamps where the fork tubes go through, on my old GL1100. They are low profile, are not godawfully ugly, bend easily, and have stayed attached through several months of rain, hot sun, and now the winter. tolerates 14.5 volts np. They are very bright too, and provide the safety and visibility old people demand!

Full Reviews