Features:

  • Genuine Honda OEM complete set of 4 carburetor mounting gaskets
  • Gaskets included: 16221-883-800 (carburetor gasket, 2 each), 16228-ZL8-000 (choke side gasket, 1 each), and 16212-ZL8-000 (insulator gasket, 1 each)
  • Fits Honda engines GC135, GC160, GC160A, GC160LA, GC160LE, GC190A, and GC190LA
  • Fits Honda engines GCV135, GCV160, GCV160A, GCV160LA, GCV160LE, GCV190A, GCV190LA, GS190LA, GSV190A, and GSV190LA
  • Please check your complete engine numbers with the description above to confirm your correct part
Perfect fit

Perfect fit. My pressure washer has a Honda GCV 160 engine. This kit does not include the Air Cleaner Gasket (This gasket fits between the intake and carburetor - )

Got a balky Keihin GCV 160 Carburetor after cleaning it per YouTube vids?

After following the clean-out procedures from 55 Ford on YouTube, I got a decent few hours of run time with the GCV160 on my pressure washer... but, after a few months storage, it was now running poorly and then leaning out and dying under load. Detached and cleaned CARB again... and noticed the gaskets were in bad shape... and this Keihin (OEM) carburetor needs air movement thru those gaskets to ensure the float fills and the air flow is proper to maintain good fuel draw under load. Notice the hole from the aircleaner side all the way over to the engine head adapter? So, I ordered this set of gaskets from the 2LCStore...installed last night... and the engine fired at the first compression stroke @ TDC...and ran ABSOLUTELY Smooth for an hour while I cleaned the wheels on my X5. No sputter, back fire, lean-out or jerking around.... smooth like a Honda should run.... or as good as a Briggs & Stratton industrial vertical shaft engine... whatever description works for you. So get a new carburetor if you need to, BUT REPLACE those gaskets! And make sure the air can flow thru the carburetor to keep the gas in the float chamber at the right level for full power under load. You may notice there is an excess amount of adhesive used to hold the Carburetor-aircleaner-head adapter assembly together, especially in the air passage molded into the head adapter...CLEAN THIS OUT! Also, little spiders and wasps here in Texas just love to get into these kinds of holes and plug them. If that air passage is not clear, your float bowl cannot keep equilibrium with outside air pressure, and the engine will suck it into vacuum.... vapor locking the Carburetor, and stalling the motor.... until it refills and you pull the starter rope again. As the fuel moves up and down in the bowl, air has to occupy the space above the fuel, and it flows through that little hole in the carburetor inlet and out along the black head adapter. Bad gaskets interfere with that air movement, and its enough to cause real running problems with the GCV160. Yeah.... we have a witches-brew concoction of alcohol and other refinery byproducts they call gasoline these days, but careful fuel handling and emptying the float bowl after every use will keep your GCV160 with its sensitive Keihin carburetor working fine for a long time.

OEM Gasket Set!

Okay - so this is a full/complete set of gaskets for a carburetor replacement job. I replaced the carburetor on my GVC160 pressure washer with a Honda engine. It is a must to have them all, put them in the right order, in the right position and the carb will be sealed up and ready to go. It arrived in a sealed ziplock bag with a sticker over the opening "Sold as a Set". They were well packed, no damage during shipping. Thanks

These are OEM Honda brand gaskets

Received this gasket set today and just finished installing on my mower. Gaskets were a perfect match and are OEM Honda brand gaskets, not aftermarket cheapies. Like another reviewer mentioned, this kit does not include the Air Cleaner Gasket, so you may have to buy that one separately. But I knew that going into the purchase thanks to that great review. Mower started right up and between these gaskets and a carb cleaning, she's running great again. 15+ year old Honda engine - can't kill 'em! Cheers -

High Quality

Although the new carburetor I purchased came with a set of gaskets, my installation is a "sandwich" of heat shield, carburetor, and filter housing. I purchased these to make sure I had all the gaskets I would need without reusing the old ones. These are Honda quality, well made.

About half of the cost of buying from Honda.

Gaskets fit properly and looked just like the factory Honda gaskets, in appearance, thickness and quality of material.

I bought these for a Husqvarna lawnmower with a Honda ...

I bought these for a Husqvarna lawnmower with a Honda GCV 150 motor on top. These were the exact size and shape as the ones that I took off. They are gaskets, and do what they are intended to do. They came in individual clear packages labeled with the Honda logo, & a part number for each gasket.

but found I really did not need to replace the original one I had as it will still in good shape on my mower

These gaskets were exactly as expected, but this set does not come with the metal reinforced gasket. I purchased that gasket separately, but found I really did not need to replace the original one I had as it will still in good shape on my mower, so it is understandable why the metal reinforced gasket is not included.

good gaskets.

They fit as advertized. Cheap insurance when replacing or rebuilding a carb.

Exactly what I needed.

The exact right gaskets for the new carburetor I bought for my Honda lawnmower engine.

Full Reviews