• New quality aftermarket carburetor with free GASKET
  • Replaces tecumseh part numbers: 640260 640260A 640260B 632689
  • Fits tecumseh engine models: HM80 HM90 HM100 LH318XA LH358EA
  • Fits 8hp 10hp snow blowers
  • 100% Brand new and high quality

Came as stated in description! No problems. Would buy this again anytime. I suppose the only gripe I have is with the shipping, this was supposed to be 2 day shipping and it took 7. I mostly blame hurricane Irma for that I guess.

I had an old Generator that had a very bad old gummed up carb. I found this one, for a great price. Popped it on she fired right up. And just in time for Michael too by the way. Nice to have good parts, good prices and good delivery. Thanks

THIS IS A GREAT BUY, AFTER THIS LAST STORM GENERATOR SHUT DOWN, BAD CARB, I ORDERED THIS ONE, A PERFECT FIT, TOOK PICTURES AND MATCHED ON LINE BEFORE ORDERING A SHAP TO INSTALL. GEN STARTED ON FIRST PULL AFTER CARB INSTALLED.

Exact replacement for a Devilbiss 5000 watt generator with 10hp Techumseh engine. Put it on and generator started on first pull! There are other small carbs like this, pay close attention to the picture and make sure it is the exact one.

This was a direct replacement for the carb on my generator. Swapped this, and filter/fuel filter/spark plug, and it fired on first pull. Ran for 30 minutes without any issues.

Gave myself fits trying to figure out what was wrong with the old carb -- I cleaned it out, adjusted the breather valve, cleaned it out again, check the spark plug, etc. For this price, though, I figured it was worth a chance. Couldn't be happier -- went right on, and the chipper/shredder ran like a sewing machine for more than an hour on a fresh tank of gas (replace the fuel line, for good measure -- .. I got this chipper second hand, no telling how long the previous tank had sat in the lines... ). First day I've used it, so if it shows any signs of trouble, I'll update -- but... very happy with this one right out of the box.

Works great don't think I could of rebuilt old carb compaired to just bolting on a new one for the price

Bought this to put on a 8.5 hp tecumseh engined, wood chipper my neighbor gave me that was sitting outside under a tarp for about 7 years and never started. OEM carb looked good but was clogged and didn't want to spend the time cleaning it nor buy new for over $100. So took a chance and bought this. Installed perfectly AND STARTED ON VERY FIRST PULL! Yesssss!!! I could not believe it but I've now run the machine 5 times and it has started perfectly and runs flawlessly. For $14 this was the surprise of the year for me.

I bought a 2nd or 3rd hand MacKissic (Mighty Mac/Merry Mac) branded lawn vacuum with a 8hp Tecumseh motor. Unfortunately the carb was not in great shape and needed to be replaced. This item was my second attempt as the first carb I purchased from another seller leaked out of the bowl and I wasn't able to adjust it. This carb bolted on in 10 minutes and the engine started up with 2 pulls.

Looks like this will replace a tecumseh Hm80 155020 on my snowblower, Ariens # 631660 or the “a” model. Don’t have it mounted yet, but looks like it will work. The throttle arm is shorter than stock, but who cares, it’s cable operated. Thought the extra port which I believe is for a vacuum line or air filter was going to be a problem, but sure it will work none the less. Guy sold me the blower for $25 because it would not run in the cold. He had taken the carb apart to jb weld a rust hole in the bowl and messed up the bowl gasket. Going to paint the bowl so it will last longer. Update, installed replacing model above, bolted up the same and ran well on this old 1984 ariens rusty beater. Guess now I need some spray paint.