Features:

  • 【Compatibility】 Compatible with iPhone and Android phones from 4-8 inches, like iPhone XS Max XR x 6 6S 7 8 Plus, Huawei, Galaxy S7 S6 S8, Note 6 5, LG, Sony, Nexus, although with case. Play a good role in your office, kitchen, nightstand, dining table.
  • 【Sturdy & Rubber Protected】 Designed on a low center of gravity makes it stable, and rubber cushions of hooks, bottom protect the phone from scratches and sliding.
  • 【Lamicall Advantage】 Suitable height, perfect angle of view when using FaceTime and YouTube, easy to read message, Facebook, emails, cooks from a recipe online.
  • 【Exquisite Workmanship】 Black aluminum alloy, smooth edge, simple, lightweight, perfectly works with your smart phones.
  • 【What You Get】 One Lamicall S stand, as well as our Lifetime Service. Offering you a full refund or a brand new replacement if you are not satisfied with it.
AMAZING CUSTOMER SATISFACTION! Read review to see why.

UPDATE: After the seller read my review, which overall was positive for the product (my personal circumstances made the item not perfect for me) , the seller contacted me to offer a refund or exchange for one that would fit my phone case better. AMAZING CUSTOMER SERVICE! EXCELLENT PRODUCT! Buy from this company, you wont regret it! Original Review: Well made and is holding up well. My only complaint is my iphone doesn't fit in it very well with a Defender case. Shame they didn't make it just a little bigger. I would have given five stars if the fit with a case was better. (NOTE: again, see my update and buy the larger size if you have a Defender case or any thick case, great product).

Perfect Cellphone Stand

Lamicall cell phone stand is perfect! I didn't want a dock - just a stand that would hold my phone securely and allow enough clearance for a charger cable, without crimping the cable. I needed a stand that has a wide enough "foot" to display my phone with its attached CardNinja Ultra-slim Self Adhesive Credit Card Wallet for Smartphones, Black, which holds six credit cards. This means the back of my phone is somewhat bulky and uneven, but this stand keeps my phone in place without any worry about nicks or scratches. Also, the rubber grips on the base are really grippy - no nudging or slipping when I take my phone off the stand. And the stand even came with extra grips. I am one very happy customer!

DID NOT WORK FOR ME BUT...

Although this product did not work for me, I gave 5 stars because of their customer service. The problem I had was because I have a wallet case on my phone so it was too big for the slot. I also wanted something that would stop the charger cord from sliding but the block on my charger cord is too heavy. I had no problem returning this stand and in fact the company had contacted me via email making sure that I received the product and also trying to make sure I was happy with the product. I will totally purchase something from this company in the future if it fits my needs because I know I can trust that they stand behind their products and actually provide customer service.

Fantastic!

I watch my Netflix and Vudu on my phone and had been wedging my phone up against a water bottle and pinning it between something so it didn’t slide. It was very difficult to work with, especially if I needed to plug it in. I randomly ran across this and figured I’d give it a shot. I did lots of comparisons for prices and quality and I am glad I settled on this bigger. I have an iPhone 6s and an Otterbox so I was worried it wouldn’t be thick enough to hold it but it fits PERFECTLY. I expected the little pads on it to be felt but they’re a nice quality rubber and it came with extras of those. I’ve already had two of my friends get phone stands because of how helpful this has become for me. The color isn’t important to me because I can always fix that. But getting this in the color I did actually was a very nice choice also. The ONLY thing I’d say could be better is I wish it had was a little more weight on the bottom of the stand so when I tap the upper part of the screen (if it’s vertical) it does shake the stand a tad but it’s nothing that makes me not like it.

Simple, elegant, and well designed

A simple and elegant cell phone holder. The stand is about as simple a device as you can get. The design looks simple enough but there was some thought put into this product, trust me its more complicated than it looks. The angle at which the phone sits provides not only a good view of its display it also allows me to work on the phone at very close to the same angle I would hold it. This depends on the height of the table or counter its sitting on but it's close enough that it’s still comfortable to use when sitting in virtually any location I've used it on our home. The angle is also important when you tap or touch the phones display. If you go much further either way, lean back more or forward more and the stand would become unstable when tapping. You can see that the piece that actually cradles my phone is made so that it sits forward of the centre point, this compensates the force of most tapping and keeps it from tipping over backwards. See I told you there was some thought put into this thing. The use of four large rubber feet keeps it from slipping around as you tap or adjust buttons. There’s also a nice wide rubber strip that the back of your phone rests against so that it doesn’t slip around in the cradle either. There are also rubber strips mounted inside the bottom hooks which also help hold the phone in place. The bottom hooks are nice and wide, they'll accommodate a phone that’s 11mm (5/8 inch) deep and it easily holds my BlackBerry PRIV with its two-piece case as well as the slim Lumia 650. The very large hole in the back allows you to easily run a charging cable from the back and under the phone (see image). The outer edge of this oval shaped hole is bevelled so that it doesn’t cut into my expensive braided charging cable, more good thought put into the design. The anodized looking finish is nice; it gives the look some depth and reduces glare form lamps or the sun. Overall the finish is nicely done, no sharp edges or blemishes anywhere. The only thing I would like to see changed would be the addition of a weight that could be attached to and cover the entire bottom to help reduce the holder from being pushed backwards when tapping a little harder. This however is nit-picking.

Good Metal Phone Holder

We purchased 2 of the black metal phone stands. It works well with our iPhone 8 plus that has an Otterbox Defender case on both. It comes with 4 soft small round pads for the bottom of the stand so it will not scratch what ever surface it is siting on, although I doesn't look like it will scratch any surface even without having the little feet pads. This also comes with extra feet pads along with extra rubber pad that sits behind the phone so it will not slide off the stand. You can use this for your iPhone vertically or horizontally, both directions work well with this stand. I like the fact I can have the phone plugged in while it is on the stand with no issues with the cord. For the price this stand is well worth the money spent.

Fits iPhone 6s+ with Otterbox Defender case!

Let me repeat that. This fits iPhone 6s+ with Otterbox Defender case! This fits my phone perfectly in both vertical & horizontal orientation, while feeling secure & still easy to grab regardless of whether the phone is charging. All branding on the stand is on the back side, which for me faces my office wall. The front of the stand is somewhat minimalist, both clean & sleek. This is the stand I've been looking for! I previously was using a ECandy stand which was serviceable. It looked nice, but it wouldn't hold my phone in the Otterbox Defender case unless I was hooking it into place by charging the phone. The tab covering the charging port would pop down, and between the tab & the cord itself the phone would stay. It would not stay in the stand in the upright position on its own.

Excellent item for phone.

I just received this today and regret I never happened on it till this late date! Such an improvement over what I was using for my iphone6 which I use instead of a laptop or desktop. I like that the phone can be plugged into the cable while in the holder. Some holders dont allow for that. I notice some similar models “adjust” but for the life of me, I can’t figure out why you would need it to flip your phone over backwards... It’s a good solid well engineered item that you need if you need to prop your phone a lot and have the screen at a convenient level. Comes in some spiffy colors too but for me, black is all I want. Not trying to make a fashion statement. Function is what I am after and this is a very functional item.

I wish I could give it 6 stars

I’ve had this in my wish list and finally decided to purchase. I’m so glad I finally did. I was most surprised by the fact it is made of metal and not plastic. It is sturdy and keeps my phone in easy reach on my desk at work. I love the cord cutout that allows you to charge with the phone in an upright position. With my old stand I would have to charge with the phone on it’s side. If you listen to music while you work this is a functional and attractive addition to use. Love it

Now my husband has one of his own...

I purchased one of these in the brushed aluminum finish (as well as a larger one for a tablet) and both have been great. My husband was admiring them, and wanted one for his phone so I got him this cell phone stand in black. He likes how it looks, he likes how it works, and uses it at his office to facilitate calls on speaker phone. Update: The one thing I would change about these stands is the Logo. It ruins the sleekness of the product to have it visible. Granted, it is fairly subtle on the silver one, but I still see it from the front, on the top of the base. It is much worse on my husband's because instead of looking nice and sleek, whoever sits across his desk has to look at the white on black "Lamicall, blah blah blah" and it is jarring instead of sleek. Lamicall, please put your logo on the bottom, face down to the surface it sits on!!! All the best artists do it this way, it is a time-honored tradition to sign functional artistic pieces underneath (think china plates, figurines, bronzes). Having all that writing visible on such a sleek piece undoes its coolness.

Full Reviews