Features:

  • Fits for 15.6 inch with Aspect Ratio 16:9 display laptop -DIAGONALLY MEASURED 15.6” (Measured Viewable Display Area Diagonally, Corner to Corner Without the Frame), filter size(W x H): 13.6inch(34.5cm) x 7.6 inches (19.4cm)--Measure your screen size as image 2 to avoid buying wrong [Refer to image 3 to install]
  • PROTECT SCREEN FROM SCRATCHES AND DUST. The screen guard protector is with superior performance to prevent scratches and dust when daily use.
  • The Matte Anti Glare Surface can effectively reduce the glare of sunlight and UV emission from the LCD screen and reduce the visual fatigue
  • 5H highly durable, anti scratch , oleophobic coating to reduce screen smudges, no residue remove
  • Including: screen protector x2, Gift Cleaning Cloth x1, lifetime risk-free warranty
Works really well and no bubbles!

First, I tried to install it using a wet method (because I was terrified having bubbles). The installation was super easy, bubble free, but... the touch screen didn't work and I think it is because there was still some water under the screen. I was impatient and removed it but later read that I had to give it 8+ hours to dry. Then I installed the second one using a dry method. I spent some time making sure to no bubbles, so attaching one little part at a time. I have to say that the results are absolutely amazing - not even one bubble, fits perfectly on my Lenovo Flex 5 15.6, removes the glare and there are no fingerprints. I don't know how people see some blue lines or any other screen distortion - my screen looks and works exactly the way it did without the screen. I highly recommend this product, just be very patient when installing and even watch a few youtube videos. Also, make sure you clean your screen really well before the installation.

Easy install, perfect fit, reduced glare, nice feel on touchscreen

Just finished installing on a Lenovo Flex 11. Easy, fast install. I'm very happy with the reduced glare, and the touchscreen feels much better too. Fits the visible area of the screen almost exactly. Nice to have a spare. My tip for a perfect install: clean everything, then lay your screen flat. Don't take the inner sticker off yet, lay the protector on your screen and use masking tape along the upper edge of the protector to keep it exactly where you want it. Now lift your screen to vertical so the screen protector is hanging from the tape. Lift it up and blow any dust off. Keep your screen vertical so more dust can't fall on it. Now gradually peel the inner sticker from the top down, while you use the card to press the screen down, again working gradually from the top down. If you do it gradually you'll end up with almost no trapped air. Any last bubbles can be worked out the edges. Use the card to 'push' the bubbles towards the edge of the screen. Don't run all the way over the bubble with the card, just keep pushing at it from one side and you can push it out the edge.

Great product

I love this screen protector. It fits my screen perfectly. Upon looking at it, you can barely tell it's there. It doesn't even interfere with my touch screen at all. Very easy to apply. I also bought a keyboard protective cover from the same company. I HIGHLY recommend buying from this particular company.

Great Anti Glare overlay

I have a 15 in Acer Chromebook. It has a great screen but if I tried to use it in a bright area, like a screened porch, or anytime I had a window behind me, I could not see the screen. I put one of these anti glare screen protectors on and I no longer have these problems. I don't see any deterioration of the image quality. It took me about 15 minutes to read the directions and put it on. Having a protective layer on while you squeeze out bubbles is a great idea. Since I had no access to a Clean Room, there is a tiny dust grain under the protector and there is a tiny bubble or two. Frankly I don't notice them at all when I am using the computer. The only way I can see them is to turn the computer off and look very carefully.

Patience to put on - but excellent protector.

The matte finish is perfect - and why I bought this product. It provides a nice surface, can hardly tell it's a protector and not the screen. A couple weeks ago I put a protector on a phone and they had a really great trick for positioning - which I used on this big thing, too. I don't think I could have gotten it exactly right had I not used this method: Before peeling any film, lay it where it needs to be and use scotch or masking tape (easily removable kind) to tape the long edge nearest the 'tab' to be pulled. (2 pieces positioned a couple inches from the ends should do it.) Then lift the film and start pulling the tab to remove the plastic a little bit at a time - with it up in the air a bit, adjust so it's straight (the tape keeps it aligned) and let the uncovered tabbed corner adhere to the screen. Slowly work your way diagonally pulling, adhering, and (I used a credit card) smoothing out. It just takes a bit of patience. I have zero air bubbles and just one tiny speck of dust I'd missed. Good product, but I wish it would have come with a microfiber cloth (my only con).

after three or four attempts it looks pretty good. I use my laptop outside a lot ...

The package came promptly on the day that was scheduled. The screen protector fits my Toshiba screen exactly with no trimming whatsoever. Placing the screen proved to be a bit of a challenge but since it is removable, after three or four attempts it looks pretty good. I use my laptop outside a lot and glare was an issue but this screen protector solved that problem marvelously. It took a a bit to get used to the screen not popping out at you with color or brilliance but after one day of use I don't even notice it at all. Getting all the dust off is important during installation because everywhere there is even the slightest dust particle, an air bubble forms that is nearly impossible to get rid of. That's why I kept trying to reinstall the screen. Using the computer indoors or outdoors now, the air bubbles that remain become invisible to me anyway. It's a good product.

Bought this for my laptop to reduce the glare on ...

Bought this for my laptop to reduce the glare on the screen. For that purpose it works really well and get 5 stars. This is a plastic screen overlay and so can be hard to install on a large screen without getting a few air bubbles in it. It comes with a cloth to wipe the screen first and sticky pad to pick up dust before installing it. I used both but still got a few bubbles in the screen after install. You can use the enclosed scraper tool (made of paper) to slide out the bubbles. If you still have any at the end of the process, you really only notice when the laptop is off. Since I bought it to cut down on the glare, I don't mind a few bubbles here and there. Will continue to try to work them out. But as I said, for glare reduction, it works really well.

Incredible value, looks like a normal matte screen

I was beyond surprised at how well these protectors worked. I bought an external USB monitor for my workstation (right next to a window with the afternoon sun shining in) just for the anti glare properties The matte finish is perfect. It is just a smidgen matte-ier than my other monitors and fits in perfectly. In the sunlight, this low-nit USB monitor can be easily read, even with dark-mode apps. Do note, though, that the protectors immediately fall in love with the screen and don't want to let go. Use some folded over Scotch tape on the sides when applying to give you more places to hold the protector and TAKE IT SLOW...slower than normal for other protectors. This is NOT a negative, just a friendly tip. Once the protector is applied, squeegeeing bubbles is as normal Also of note, the packaging contains VERY thorough product information. Outside of the very obvious misspelling "Premiun" (lol), the information is very thorough and feels like a professional product, including actual measurements of the protector, like reflectance and transmittance.

Additional Instructions on Installation

I installed these 2 protectives covers on two Dell Inspiron 15 computers today. The only caveat I experienced on this product was that of I was overconfident and took off the entire adhesive side of this product at one time. After placing it I discovered an unseen dust particle--not huge, just irritating to a person with OCD tendencies. In the future, I would still buy this product. When installing the protector I would carefully clean the glass surface (I used a wet spray cleaner) on my electronic item. Look for dust in the "glare" of the screen. Allow it to fully dry. When ready to position the protector, wipe the screen again with the cloth provided. Have the dust removing sticker close. Only remove the adhesive side of the protector partially from the long side. Begin there being sure that you have the protector straight. GRADUALLY begin laying the protector on the electronic screen. Remove the sticker a little at a time. Should you see that a speck of dust leaves a bubble, use the dust remover sticker immediately before proceeding. Replace the dust remover sticker back on its original sheet. Continue until the cover is securely placed. These lessons were learned after installing 3 protectors on 3 pieces of electronic equipment in 2 days. The third time (as described above) was the charm. Lesson learned! [2PCS PACK] 15.6-inch Laptop Crystal Clear Screen Protector, FORITO Notebook Computer Screen Guard Protector for HP/DELL/Asus/Acer/Sony/Samsung/Lenovo/Toshiba etc, Dispaly 16:9 (2-Pieces/Pack)

Awesome screen protector! If you know how to apply it. Read on.

This is my second time buying this anti glare screen protector. It comes with 2 screens in a package, but don't expect to use it on 2 different laptops, there is 99% chance you will screw up BIG time on the first application and will have to use the second screen anyway. That's what happened to me. In fact, I screwed up on the first one, and on the second one .. just not as much. I still have at least 10 bubbles that I can't get out and dust bubbles in a few spots. Its a totally different story with the second purchase. I got better at applying it AND the included "squeegee" is 10 times better then a crappy cardboard one that I got in the first package. I learned from my mistakes, don't bother with instructions by the way, they are not quite clear, I will give some tips below. First screen protector I applied didn't come out too great, acceptable but I knew I could do better. I tossed first screen protector out and started over with the second screen protector. Result: 99% Flawless application, no air bubbles, no dust bubbles! This screen protector works as advertised, it does in fact reduce glare by a lot (if you typically see your own reflection when the screen is off, with this protector it will be reduced by at least 60%), it does repel dust, and it does protect your screen from scratches, however the actual screen protector does scratch so don't start testing it by scratching it all over :D. Application steps/tips: 1. First clean your screen, use the included dust cloth, first by itself, and then spray either Isopropyl Alcohol on it, or dab it with Hand Sanitizer. The alcohol is great at removing any residue and finger prints your might have on the screen, as well as it evaporates very quickly. DON'T USE INCLUDED "dust removing" stickers, they will most likely stick to your screen and then you will have to remove the stickers from your screen and the residue it left behind, it happened to me both times. I also recommend wiping the screen with a good microfiber cloth right after, mostly just to get rid of any static (electricity) on your screen, or it instantly can become a dust magnet again and you really don't want that while applying your screen protector. 2. Now take your screen protector. There are 3 layers, I repeat 3 layers! (I've seen some reviews of people claiming the protector is either too thin, or doesn't reduce glare, or scratches easily, that's most likely because those people tried to apply the 1st or 3rd layer) The layer your want, the actual protector, is in the center. A RED sticker is attached to the bottom layer. Remove the bottom layer ALL the way!.. 3. MOST IMPORTANT STEP. Carefully take your screen protector by the corners (try not to touch the bottom side at this point). Line up the screen protector with your screen at 2 corners (I recommend left top and bottom, or right top and bottom). Don't bother with the squeegee at this point, just line up the corners and slowly let the screen protector "unroll" to the other side of the screen. If you didn't line it up right, I wouldn't bother redoing it, might as well start over with the second protector that's in your package. If you peel it off to do it again, there is going to be static electricity at this point and you might get dust in between your protector and your screen causing a lot of dust bubbles all over the screen. 4. Now get the squeegee out, if you got the same squeegee as me, it will be plastic on one end and soft cloth on the other, in which case only use the soft side. For bigger bubbles you have to be slow, for smaller bubbles you can just rub the actual bubbles back and forth with the corner of the squeegee and they will go away. As a reminder, the top layer of the screen protector is still on at this point. Don't remove it until the very end. You can "scratch" the bubbles out as hard as you want, you will see scratches on top of the top layer, don't worry.. it's not going to scratch your screen or the actual protector... scratch away, and get as many bubble out as possible. Here is a thing though.. You might have a lot of bubbles, but chances are half of those bubbles are between the screen protector and its top layer. 5. Once you get most or all of the bubbles out, take the top layer (by the BLUE sticker) and remove it. Viola! You are done. Here is what to do with remaining bubbles if you have any.. Don't start scratching them away, place the protective layer you just removed back on top of those bubbles and get them out this way, one bubble at a time, you don't want to scratch your protector as this point. Get all the bubbles out, wipe your screen and you are done.

Full Reviews