• Multifunctional, can support PC monitor/screens, laptops, printers, fax machines, computer screen risers, TV monitor stands, keyboard shelf racks etc. (Maximum Holding Capacity 30KG).
  • Smart and sturdy design, space-saving keyboard slide underneath, includes holding slot for smart phones, a hub for cable management.
  • Measuring 5.1'' in height, which raises your screen for improved visibility and reduces neck and back ache. A must desk accessory for home & office use.
  • Suitable for any place in the home, such as study room, office, living room, bedroom.
  • Easy to assemble with instructions provided.

I have very little desktop space in my office and I use 3 screens (my open laptop and (2) 23" monitors), so I feel like my desk is always cluttered. Using these monitor stands accomplishes two big things for me: 1) I can now sit up straighter because my eye line is 5.5" higher than it was; and 2) I can store papers, tablets, calculators, etc. under the monitors now. It is making my work life easier because I feel better sitting at my desk now. The only thing that would make me love them more is if I could figure out how to make them do my work for me... :)

Easy setup (just need a screwdriver and done in <10 minutes, but be aware that the screws will be "too big" for the holes, so you'll need to put a very small amount of pressure as you're screwing it in and it will screw in there in the right place). Needed to clean it a bit (was a bit dirty, and also as you're screwing in, you'll get some pieces of wood that chip off) and it is a bit wobbly after assembly when moving/holding it (though that won't matter since it's always going to be sitting on a desk). Overall satisfied with the product considering the price, ease of assembly, and functionality for me.

First off, if you are not used to assembling stuff like this I guess it can be a little confusing. But quite honestly there are not many pieces and it's pretty self explanatory, Took 15 minutes to assemble, and I did use some elmers glue only because it happened to be on my desk, wasn't necessary. The hardest part to me was putting the little black screw caps on :). It is extremely sturdy and finished on all sides, it's a pretty good quality little piece. My only complaint is that it wasn't really big enough for my application but it was my fault for not measuring. I am going to use it else where for sure.

Ordered 3 of these. I have 2 stacked on top of each other with my screen ontop. I use it to hold my 27inch Monitor, PS4 games and PS4 Slim. The third one my wife has her 27inch screen on it and her ps4 under it. Great organizer, sturdy, all parts where in the packge, and was pretty easy to assemble. I had all 3 assembled in about 15 minutes. The cord holder is a little useless as if you put more than 2 cords through it, it doesn't do its job. Not a big deal, zip ties work fine for me! Highly recommend if you're in the market for a small desk stand.

Pretty good quality and a sturdy stand. After a few weeks, I've noticed that my back and neck don't hurt as much after spending all day working at my computer. I bought this for my home office and it's perfect. My S.O. and I each got one. He's 5'9 and I'm 5'4 and we both like the height that our monitors are at. I have a phone case and a large phone so the pocket for the phone holder doesn't really work for me, but it's not something that's in the way or detracts from its use.

This shelf was super easy to assemble. I bought it so I'd have more room on my desk and it did the job. The wood looks nice and it seems pretty sturdy, but it looks like it'd be prone to scratch easily. If you were to have kids using it to draw on it or something it looks like it'd show scratches. (Haven't tested it for that, but I'd rather not because I like to keep my things looking nice lol). Overall, it looks stylish and serves its purpose. Would definitely recommend it for an office or your room at home that gives off an office vibe.

Came in perfect condition. Instructions were a little confusing - they had pictures but language was in Chinese (?). Luckily, my brother built a desk with similar hardware. (There are these short/wide screws with a tunnel system of sorts on the side. You align them so the longer/thin screws can poke through them, and once inside you twist the big/short screws clockwise to lock them together.) Have a screw driver handy to set some longer screws into the pre-made holes. (You can’t twist them in and then tighten. You need to force them in a little as you tighten until they lay flat. Careful not to force them in crookedly - I was worried about that but they all turned out nice) The end result is exactly like the photos, and it’s very sturdy/roomy. I did pass on the cord organizer for the side. It’s a tape adhesive system that doesn’t look super sturdy, but for all I know it is. I don’t really need it, and rather not risk leaving adhesive on the nice surface in vain. If you do need it and have some goo b gone handy in case it doesn’t work, I say try it. Maybe clean the area with rubbing alcohol before sticking on. Overall a great buy!

I own a similar 2-tier stand from another manufacturer (Fituyes or something like that). I wanted a second one (decided to use the other one to raise up my printer so I could have storage underneath), and decided to buy this one as the price was a few dollars cheaper. I was a bit leery, the name looks funny "1homefurnit." I bought mine from the seller "The Mells" through Amazon. Turns out the cheaper price doesn't mean a cheaper product. I think this one is actually better than the first one I bought. For such a simple thing, it's very well-designed. The instructions are very clear and easy to follow. I did have some difficulty putting in the screws, but that wasn't the fault of how it was manufactured, it was my own clumsiness. I split the laminate surface a little bit around one hole, but it's on the underside so it doesn't show. Just screw them in carefully and don't force them - they all screwed in straight. The wooden pegs also properly fit into their holes. Everything aligned properly when I put it together. Once you have the 4 pieces put together, you insert these little metal thingies that wrap around each screw and you turn them to tighten - you can feel the whole shelf tighten up and stabilize. They also include rounded plastic caps to cover up the holes with the screws. Finally, they include little black rubber bumpers for the bottom so the shelf doesn't move and and also doesn't scratch up your surface. I use it to hold my iPad on top, my external hard drives on the shelf, and my 13" MacBook Pro slides underneath. I'm very happy with this product and would buy it again.

I bought this to use on my makeup desk. It allows me to sit my old style, lighted makeup mirror on top and have a little storage underneath. My makeup table is rather narrow, so this is just perfect and raises the mirror up to the right height. It was easy to put together, matches the wood of my desk reasonable well and it seems pretty study and durable. I can't ask for more than that and I'm very happy with my purchase.

I have a docking station for my laptop that takes up a lot of space which I need for other things. I bought the 21.3" single surface monitor stand. I got this to place over the docking station/laptop. It works perfect. There is space for air flow. Now I have a flat surface to store files, office supplies, etc.. It took 3 minutes to assemble and arrived on time. Assembled exterior dimensions are: 21.3" long & 10" wide & 4" high. Interior dimensions are: 20.25" long & 10" wide & 3.5" high. Definitely recommend.