Features:

  • Foam Rubber Padding
  • FOAM RUBBER SHEETS-Weather proof, Oil resistance, resistant to corrosion, dust proof, shock-absorbing, sound and heat insulation, anti-skidding and insulating
  • ADHESIVE PLAIN SQUARE MATERIAL - Neoprene, Rubber, Chloroprene. Environmental protection material, foam, toxic free
  • RUBBER INSULATION SHEETS-The temperature range is from -50℃ to 150℃
  • ADHESIVE FOAM PADDING-Strong adhesive backing, waterproof and non-degumming, stick firmly
  • RUBBER SHEETS, ROLLS & STRIPS APPLICATION-Widely used in various doors and windows, furniture, electrical cabinets, cars, speakers, toys, sports equipment, etc
These are great for insulating drone batteries for cold weather use.

Adhesive Foam Padding, Self Stick Weather Stripping Foam; These are great for insulating drone batteries for cold weather use. I have use these on batteries for Mavic 2 Pro, Mavic 2 Zoom and Mavic Air. With this thin layer of adhesive foam on the outer surface, the batteries stay about 15°F warmer than without. I am happy with the results and my drones are flying safer in the Winter weather. I would suggest to the seller that cutting this material to fit all the popular DJI Mavic drone's batteries would be a very good idea for a new product, and people would pay twice as much for a set of winter battery warmers.

Great foam to replace foam bottom on a coffee thermos!

I have a coffee thermos that started to retain water between the air insulation layers (I stupidly soaked it in water ... Bad idea!) I couldn't get the water out without peeling off the foam and unscrewing the bottom. I let it air dry, put the screws back in and cut a new foam bottom out with this. It looks amazing! The green thermos is the one I replaced, and the blue thermos is what it looked like before. The lumps you see are the screws, not this product. We shall see how the adhesive and the foam hold up to some light surface cleaning. (I will not be soaking this anymore!) I'll update only if I have negative remarks on how it holds up.

Keep finding uses for them

I originally bought these to try to fix some rattling in the plastic of my dashboard in my truck. I think it would have worked but then the truck was totaled so I never really got to see if it solved the problem. However, I keep finding other uses for them. I bought a used snow blower recently, and it was missing a little rubber piece that kept the drive lever from banging into handle when released. I cut a small piece of this foam and stuck it underneath the lever and it works perfectly. I wasn't even that careful to clean the surface first and the adhesive stuck well. This is just a good thing to have around, and you'll find reasons to use it.

For the legs of chairs

I bought those for the legs of my chairs, so that they will not make noises and scratch the wood floor when I move them around. One side of it is soft and the other side adhere to the wood with no problems. This is exactly what I want. A straight five stars!

Solved My Problem!

The foot pedals on my elliptical exercise machine have hard plastic ridges for added grip. Unfortunately they only serve to hurt my feet. I laid two of these on each pedal and voila! problem solved. Good thickness, soft enough for bare feet, and a strong adhesive that works even on rough surfaces. Good stuff. Solved my problem!

Cheaply Manufactured

2 (of the 20) squares (10 percent) were clearly defective (see photo). Their thickness was about 1/32 (not 1/16), most of the adhesive was permanently stuck to the wax paper backing, and they were deformed. I had already started my project when came across the defects and so a return was not possible. My advice is to review the entire contents (not just the first one or two like I did) and then decide if it is worth the trouble to return it and buy a new one. The portion of the product I used worked as expected. Update: After reading this review the seller reached out and replaced my order with a new one. Awesome customer service and unexpected too on an inexpensive item as this one. Consequently I have changed my rating to five stars for excellent customer service.

Great foam pads... lots of uses

Got these to use for lining the bottom of a metal decoration that I didn't want to scratch my desk. It was easy to cut, sticks well, and is working out great. Arrived quickly. I can think of many uses for these.

(1/8") Perfect non-slip pads for furniture

I recently installed vinyl flooring and needing something to prevent our large couches from sliding. Unfortunately, the feet are 5" x 5" squares making it really expensive to buy commercial non-slip pads. I took a gamble on this and figured it would be a cheaper DIY way that let me make whatever size I wanted. I am happy to say that these have enough grip to prevent sliding while still allowing you to kind of move the furniture if you lift it just enough to not drag completely on the pad. So far, it's been about a month, and we haven't noticed any dust or anything clinging to the base of the couches or chairs, and the sound dampening has been awesome for pumps and a few other mechanical things that we wanted to quiet down :)

Thin, non-slip and good adhesive

I've been looking for some time for thin sheets of non-slip padding to use on the bottom of miscellaneous stuff to keep it from sliding around. I finally came across these and they work great! I always worry about how good the adhesive will be on self stick stuff but this exceeded my expectations. So far I've used it on a few 3D printed plastic parts that usually are very slick. It has stuck well to the part and prevented sliding.

Cosplay Helmet

I bought these to put into a cosplay helmet. The helmet was a tad loose and needed something to keep it in place (My wig wouldn't do). I decided to buy these and put them inside of it. The padding was just what I needed and as described by the seller. I did not have a problem with the adhesion, or cutting the pieces down to what I needed. I plan to buy more in the future.

Full Reviews