Features:

  • Brass/SS 0.012 inches(0.3mm) Orifice,10/24 Threads Misting Nozzles 10pcs, stainless steel brass body, Leak-proof,Self-sealing O-ring Including with each Nozzle;no Tape or Sealant is Required
  • Operation Pressure:20-80kg/cm,Flow Rate:80-145ml/min， Minimal Water Use of 1/2 Gallon of Water Per Hour Per Nozzle, 10pcs Misting Nozzle and 10pcs Nozzle Tees and 1pc Plug, Best clogged mister nozzles replacement for DIY homemade low pressure greenhouse, umbrella, patio mister systems, outdoor cooling systems
  • Turn on the tap slightly until jets are working, enjoy the cooling misting system .Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time.
  • Hard water, lime and calcium may clog the fogger nozzles, Clean nozzles periodically by soaking them in vinegar & warm water solution, Replace sediment filters (not included), Remove them at the end of the season
  • Very popular is the application for refreshment playgrounds for children - lawns - pavilions - tents - campsites, but also in the animal breeding - animal husbandry there are many applications in the field of water wetting.
Great for replacement

These tees and nozzles worked great to replace a couple of mine on a mister system that froze over the winter.

Nice set of mister heads, good price

Great deal on mister heads. Set up a mister on my AC condenser. Hoping to cut cooling bills.

Handy

I love these style connectors for drip line in the garden..... now I find them with mister nossles... Works great ....

Works fine.

They work good. I wish the mist was a little finer but all in all, it was a good purchase.

Great low pressure nozzles

These misting nozzles are very well made. The push-on 1/4" fittings seal properly and don't leak. The stainless steel .012" orifice nozzles can easily be removed and cleaned with a .012" PCB drill bit or one can do as I do and use an ultrasonic cleaner filled with vinegar and process them for 30 minutes and then rinse them with water. They will then be ready for immediate use again. So far, these nozzles have been in 24/7 continuous duty for over three months and have yet to clog. They work very well at pressures as low as 20 psi.

Very nice, work well.

These work well. Make sure to get a filter though because they will clog up since the holes are so small.

Great Product

Works as expected. Easy to install.

These things work great with 1/4 tubing used for drip systems

These things work great with 1/4 tubing used for drip systems. Created our own system with 20 of these and two 100’ rolls of tubing.

Bought these to replace a different (and problematic) set of ...

Bought these to replace a different (and problematic) set of misters from another manufacturer. Installation was a breeze, the slip-lok mechanism is much easier to use than the "other" set, and the thread-in nozzles are very simple to install; the other manufacturer's tees had a slip-lok mechanism for the nozzles as well as the tubing, and the nozzles were very difficult to replace on that set. I expect that if I ever do have to replace one of the nozzles on this set that it will be a 5-second swap.

Great Misters

These are great misters and easy to connect due to their slip-lock system that they use.

Full Reviews