Features:

  • Space-saving Solution: Ultra-thin LED recessed ceiling light, high brightness. Only requires 2 inches clearance of ceiling space , perfect solution for your narrow ceiling that doesn’t fit for a can
  • High-efficiency Lightness: Energy Star certified wafer light, only consume 12 watt, provide 850lm brightness which equals to an 100W halogen lamp, saving $2091 per set in its 36,000 hrs lifespan; frosted LED lens, anti glare and scratch resistant
  • Simple Installation: Connect the provided J-box to the light using male/female cable and use spring clip to fix it on the ceiling, hassle free, install in seconds. Recessed can is no longer a limitation for your choice
  • Reliable Safety: ETL-listed safety standards, the aluminium lights guarantees corrosion protection and rust prevention, and the sponge gasket effectively improves the sealing performance, which is a perfect fit for your roof and ceiling
  • Widely Application: 5%-100% smooth dimming, compatible with most dimmers, the light would meet various needs in applications such as closets, kitchens, hallways, doorways, basement and so on
Look great. Easy to install

These are so white, they make my daylight white LED bulbs look yellowish. Super easy to install. Once you have the whole cut open, it's literally just seconds to put in (this coming from a first time DIYer). I installed 3 in a 7'x10' bathroom. Two would have been enough, but I put the third one over the tub and it looks so much better. I live in a dark neighborhood and two of these installed in the soffit were enough to illuminate the whole front lawn. Warning: like other reviewers have mentioned, the holes have to be 6.25". I found an adjustable hole cutter for about $25 in my local HD and it was a breeze.

A nice light that works well.

These lights are a major upgrade from older can lights. They are completely flush with the ceiling and have no opening for bugs or dust to collect. The replacement install was easy, we had our electrician do the j-box install for us. But everything comes well packaged and is simple to use. We are happy with our purchase and will be swapping out the rest of the lights in our home for these ones. On top of everything, the lights look really nice. The only thing I wish was different is if there was a way to change the brightness of the light built into the light. We have another type of light in our home and all we have to do it pull it out and move the switch to go from ultra bright white down to a very warm white. It’s a convenience, but it also means the lights can’t fit into slim spaces. So I understand why the option isn’t available, but it makes choosing the correct brightness a bit more difficult. Regardless, the lights look and work great and we will continue to buy them!

Love these things.

Super easy to install, literally can take a few minutes each if you know what you're doing. Even if you are a novice, the first one shouldn't take longer than 30 minutes to install, each one after that is a few minutes. The recessed lighting look is very much in fashion for home designs and remodels, and these are a very fair price. I would certainly buy them again.

Awesome, super bright, easy to install recessed lighting for the right price!

Unexpectedly bright. Super easy to install. The included lever nuts make wiring as easy as it could be. I could've gotten away with installing less than I did in the area but wanted the coverage. The lights themselves are ridiculously thin. I hooked them up to a Kasa/tp-link dimmer. They fit snuggly in the hole and the clamps work well. I read some issues with the hole size. I used the included guide to cut the holes with a jigsaw and they fit perfectly. It's possible using a hole saw isn't ideal but I'm not sure on that. The minor complaint I have is I ordered 3,000k (soft white) and they look closer to 4k. All my other LEDs are 3k and these look a little cooler but not very noticeably.

Need the correct hole saw for the job

A 6" hole saw is too small. The correct hole saw for these lights is the "Blue Boar Recessed Light Carbide Grit Hole Saw 6-3/8” dia for 6 inch lights." This is available on Amazon. The 6 3/8" diameter is the correct hole diameter for these lights. This hole saw is made to go through ceiling material. Other hole saws made for wood will wear out after a couple of holes.

Do not get the dimmer recommended by Amazon

I was skeptical about the lights but still ordered them. After the install i was happy with the brightness of the light but with the Dimmer recommended by Amazon the lights would not dim enough and where still very very bright. I figured ok i wanted my room brighter and it is what it is. I then decided to get a different dimmer I had bought from HD, i installed it and WOW what a difference the lights are great, dim to almost nothing and when at 100% I need shades. I was so happy I bought more to put around my house outside and my garage.

Worth the purchase and great item for dimming lights with a smart dimmer

I bought two of these 6 pack just to see how they look... Well they look and work great I bought 3 more of the 6 (packs) 30 total. My advise: Is to use irrigation flags to make a tiny hole where you want the light to be just to make sure no obstacles are in the way and/or check attic to double check you don’t drill on a stud. I Adjusted cutter to 6ins or so...BUT... keep in mind the light wafer is not completely circular on top. it has screw notches which sheetrock hole might need to be cut with a jab saw just a tad to have a snug fit. You can chose your own tools but this worked for me. Home Depot tools used: Dimmer: Leviton Dimmer with WI-FI technology Model: DW6HD Model# R01-DW6HD-1RZ Internet# 300799634 Store SKU# 1002374961 Cutter: Milwaukee adjustable cutter Model# 49-56-0320 Internet# 205744284 Store SKU# 1001240064 Irrigation Flags: Model# 53314 Internet# 100113095 Store SKU# 136038 Halex 3/8 clamp connectors: Model# 20511 Internet# 100133208 Store SKU# 839647 Store SO SKU# 1000518517 Klein Tool Voltage Tester: Model# NCVT-1SEN Internet# 100661787 Store SKU# 780066 Milwaukee Wire strippers: Model# 48-22-3079 Internet# 202966263 Store SKU# 547005 Store SO SKU# 1000092744 Milwaukee Jab Saw Model# 48-22-0304 Internet# 202206142 Store SKU# 496462 Store SO SKU# 1000387440

Awesome for Tight Spots!!

I had to replace my furnace a couple of years ago and while I was traveling, my wife had a new high efficiency furnace installed. The guys had to run 2 PVC lines outside of my house and instead of working around my original recess can I had in place, they just removed it and ran their lines right where my can was. Because the space is extremely tight where I installed my can, I've been procrastinating trying to figure out how to install a new one. Well, while surfing Amazon one day, I just happened to stumble across these thin LED recess cans. I figured I'd give it a shot and ordered the 6 pack. First chance I got, I installed the one that was missing. Installation was easy (I use to be a residential electrician) and it'd definitely be easy for the DIYer that is somewhat mechanically inclined. Colored wire to colored wire. White to white and bare copper (it's bare copper if your house if run in romex or green wire if your house is run in conduit) to green wire. My only issue (which really isn't that big of a deal) is that these recess lights are a tad smaller than original recess cans as you can see in the pics. I'm glad I bought the six pack because this light is a bright white where my other recess lights have a slight yellowish tint to them. But, it's easy enough to remove an existing recess can and swap it with a new one. So, I'll have 2 more lights to swap out once I'm back home. Too bad these weren't out when I originally finished my basement because there are several spots I would have loved to of added some recess lights, but traditional cans were the only thing out at the time. Now I know better!

Torchstar 6" recessed lights

Purchased these after meeting with my electrician for some re-work, he said these are of good quality and bright, he was right. Packaging is good, directions so so, * you almost need a 6 1/4 hole saw bit for these as there are nubs on that back that the screws for the light recess into, the junction box is good, comes with small wire nuts. side connectors are break free 3/8 so you will need some type of connector for the wire to connect thru. Good LED lighting, I ended up buying more.

WOW

Wow what a big difference these lights made to our kitchen.. livingroom hallway and master bedroom next

Full Reviews