• Ensure accurate and reliable drip system performance with this all-in-one faucet to drip irrigation connection kit. Connect your drip irrigation system to your water supply, keep out debris with a filter, maintain optimally low flow water pressure, and prevent dirt backflow all with a single pre-assembled unit.
  • Connect ½” tubing to any standard ¾” male outside faucet, hose bibb, spigot, garden hose or sprinkler manifold in seconds for an easy fit. Leakproof connector is compatible with any 1/2" tubing sizes .520 to .620 ID (inner diameter) including Rain Bird and Dig.
  • Kit contains a drip irrigation backflow preventer, 150 mesh filter, top-quality Senninger 25 PSI pressure regulator valve, already put together and ready to use immediately.
  • Don't settle for leaks and blowouts. Our durable assembly contains only the highest-quality parts to ensure properly functioning, precise and consistent pressure reduction and backflow prevention. Senninger 25 PSI pressure reducer is 100% water tested for accuracy and known worldwide for its reliable performance.
  • Save money and time buying everything you need at once. Jumpstart your drip irrigation installation with this set of essential components for building a maintenance-free drip system. Ideal for use with raised garden beds, residential, farm, greenhouse gardening and agricultural watering applications.

I purchased two of the Habitech drip irrigation faucet adapters for my new twin zone Drip timer. I've only had them a couple of weeks so a long time verdict I can't give but I can say they were super easy to install and seem to give better flow than the old ones. There are no leaks and they work as advertised. So far I am very happy. They also seem to be built to a high quality standard.

Although this adapter kit seems expensive it really isn't when I consider how many times I've had to replace hose or dripper ends due to the water pressure being too strong. I purchased one of these to attach directly to my timer. It works so well that I bought a second to have as a backup. It 's been working great all summer!

The adapter kit includes all the parts you will need (backflow preventer, pressure regulator) and the connectors (faucet end and adaptor end to 1/2" tubing), all of which look to be very well constructed. The hose-end connector even has a tiny screw you can use to tighten it against a faucet, but I found that this inadvertently disturbed the provided (flat) faucet washer in the connector. I didn't need it anyway, but if you feel you do, you might try an O-ring washer. I also didn't use the tubing adaptor, because I have the adaptor kit installed close to the faucet, after which I have to split the water out, and then it goes through hoses to different areas of the garden. And it's all made in the USA.

I had one of these by Rain Bird that was a joke! No matter what adjustments you made it leaked. This Habitech brand is awesome! Solidly built and doesn’t leak a drop. Highly recommended!!!

This is a quality piece. You’re getting a Senninger 25 psi reducer, a Hendrickson Bros. backflow preventer and a nice 1/2 hose connector. All work great on the end of a dual feed timer.

All you need to connect a 1/2" in line irrigation system to a standard male 3/4" faucet or hose line. 3/4" fitting, filter, 25 PSI reducer and 1/2" irrigation tube connector all in one item. Makes it really easy. I installed two of these for two separate ~1/4 acre fields of row vegetables using existing 3/4" faucets off of 1" irrigation plumbing at 65 PSI. I needed to have a pressure reducer on the lines to prevent the blow out of the 2 gallon/hour emitters in the 1/2" irrigation tubing. If connecting to a full pressured line, you run the risk of blowing out the emitters due to the higher pressures in the irrigation tubing. 25 PSI reducer on this Habitech unit is perfect. I used a 3/4", ~10' piece of hose from the faucet to the Habtiech adapter which allows the adapter to lay on the ground in-line with the irrigation tubing - less chance of breaking it off at the faucet. Plus, when I need to use an battery automatic timer on the line, it will fit nicely between the faucet and the hose. Then, connected the 1/2" irrigation tubing to this Habitech adapter. The connector is a standard 1/2" fitting with hand tightening screw down connector. I use similar devices in my vineyard and these are definitely better than the slip-in-type connectors you get at the big box hardware stores. You can easily disconnect these and re-use it, they are well made and they provide a very strong connection to the adapter and 1/2" irrigation tube. A really easy install and it performed as advertised reducing the pressure to 25 PSI for the 1/2" tubing. One unit easily drip irrigates each of my ~1/4 acre plots. Highly recommended for easily adding drip irrigation where you have a standard 3/4" faucet or hose.

I’ve only been using them for a week, but so far they’re far superior to the RainBird one also available on Amazon. Will update later with a more thorough review.

I purchased this to replace my Rain Bird adapter that leaked from the beginning. The Habitech adapter has worked flawlessly and no leaks have been noticed. My irrigation system is 100% operational now with all the water arriving to my designated area's. If you are designing your own irrigation system, this should be your first purchase! Easy to install,minimal effort. Customer service is also 5 stars as I received an email asking how things were going. I appreciate this extra effort to ensure everything was going well.Shipped fast even with free shipping. Product is as described, a complete adapter, you install this adapter directly to your garden faucet or hose and the 1/2 main irrigation line fits perfectly and tight. You do have to force the 1/2 tubing on, so expect that but laying that line in the direct sun for a little helps. My system is set up on a timer and has a hose to travel to this before entering the garden. with all of those connections, again, no leaks anywhere. I would recommend this product and I will purchase another to add new irrigation systems for other area's

I've had some much trouble with the Rain Bird equivalent. They all leak no matter what you try. I bought two of these and they worked perfect right out of the box. We'll see how they hold up over time. But i'm very happy and I'm glad there is a proper alternative to the rain bird version. I still like the rain bird system, just not this piece. Thumbs up for this!

I've gone through 4 Rainbird connectors in the last 2 years. Every one leaked to some degree. With some McGuyvering we could baby them along for a while but eventually more leaks. I just hooked the Habitech and NO LEAKS! It's definitely worth the extra couple of bucks. I'm ordering another for my second hose.