Features:

  • Durable plastic construction to create the best piping support
  • Compatible with 3/4 in. Pex tubing
  • Half clamp hanger design makes supporting and removing pipe easy
  • Pack of 50 Pipe Hangers
  • Not recommended for CPVC
Like these clamps

Like these clamps...used them for mounting plant hangers on the deck & couldn't find a size/configuration that worked until I saw these. Holding tight and look better than the bent nails I was using before.

They worked as expected, I'd recommend them to others.

These worked for me to secure CPVC piping (1/2") in the basement bathroom I'm building. Just pounded the nails in and boom -- done. I also used some strap clamps in some places. But these worked as a complement to those for some areas and these cost less.

Used for 1/2" Type L copper

I wanted easy to install hangers for pipe in inaccessible areas in our 109yo house. These completely isolate the pipe from any dissimilar metal, seem to help dampen vibrations from water hammer, and the biggest thing is, only one (ring shank) nail to drive, and when contorting, stretching and twisting to get at the clamp it holds the nail head above pipe, and shields the pipe from the hammer. So no worries about accidentally hammering on the pipe itself, like with strap style clamps where you have 2 nails to drive below the top of the pipe.

Use a palm nailer for installation.

While I occasionally lose a clip due to a bent nail whether I used a hammer or nailer, the air driven palm nailer is much faster and easier to use. The clips hold well though the pex will slip out if you bend the pex to tight.

Works as advertised

Used these clamps to install 3/4" Pex tubing in my crawl space. Even though I was working laying on my back due to the narrow height they saved me a lot of time since they only needed one nail to be hammered in rather than two if I had used a different clamp. A real time saver.

Fit a copper pipe well and no trouble

These were great. The price was cheap enough and I had no problems with nailing into 70 year old beams. The plastic clipped onto the 3/4 copper pipe nicely and snugged up against the beam perfectly with the provided nail. I ordered some 1/2 inch ones too after noticing I needed a few. Reducing banging pipes.

Works as expected

I have no complaints so far. They support the PEX tubing as expected. If you're running PEX tubing horizontally be sure to mount the J-Hook with the nail on the bottom side to achieve proper support. I see a lot of pics and reviews stating that the hook doesn't hold that well. It's because you have the nail on the top side of the PEX tube. If running PEX tubing overhead, I'd suggest doubling up the J-Hook mirroring each hook to maximize support. The J-Hooks obviously have their limitation as to how much weight each can support, which is why it's important not to space them to far apart on longer runs of PEX.

Good product s far

I have not had the opportunity to use these yet as we just received them a day or so ago. They look like they will work fine and the quality of the product looks good too. We received these promptly so that was a good thing. Would buy again.

Inexpensive way to secure Pex (or any) tubing

Used these to secure a pex run for a whole house water filter system. Did the trick! While very secure, these clips allow you to pop the hose out and back in if necessary.

easy to attach larger clip

Great easy to attach with nail, hang 2 different ways and large enough to use with hose or even has hanger. I have used for patio mist system and for hanging Christmas lights.

Full Reviews