Features:

  • Attention: This 150259 hose fits ONLY all pulldown Moen models and NOT the pullout models. (All pullout models use the Moen p/n 159560 hose.)
  • Safety: Takes brass connectors Environmental and certificated PE tube with durable nylon wrapper.(CUPC, NSF, FDA)
  • Easy too install: It’ s exactly the same one that needed to be replaced for your moen pulldown faucets.
  • More durable:The peparation density of ours: 3 strands X48 spindles; others: 4 strands x 24 spindles.
  • Warranty: 360 days money back. Please feel free to contact us through skygenius.us@hotmail.com for money back if it not fit your faucet.
UPDATE - ALL IS GOOD --- Spray end does not fit back into faucet

UPDATE: We wrote to the vendor, US Skygenius and explained our situation. When we built our house, we ordered a "pull-down" faucet and that is what is listed on our contract, so when it broke, that is the part we ordered. After speaking with the vendor, we realized what we actually HAVE is a "pull-out" faucet. We reordered the new part and it works perfect (see third picture). I wanted to update this review and let everyone know that it was our own fault the first part didn't work and that the vendor here was great in helping us get the correct part...they even said to keep the wrong part, but we will send it back since we have no use for it. Now I'm po'd with the builder but am past the time for them to do anything about getting what I actually paid for... :( ______________ Although the product LOOKS exactly like our current (leaking) hose, the swivel-end going onto the spray handle is larger than the original and, once connected, the handle will not fit back into the faucet...as someone else said, it simply hangs down. :(

Perfect fit and easy to install

Works perfectly for my pull down kitchen faucet. It’s exactly like the original. It’s good to know your exact model number to make sure this one works for you. I have the model, “Annabelle CA87003SRS facet.” The equivalent Moen Hose Kit model is #150259. I contacted Moen as it was still under warranty but got the replacement 15 days later. Thank you Amazon, for shipping this out within 2 days as I had a very leaky hose and needed it ASAP!

Perfect replacement for Moen Pull-Down faucet

This hose is a simple installation, and it took more time to empty the sink cabinet so I could navigate under the sink than it took to install the hose. The hose was the exact same length as the original, and the only thing that would have been helpful was a small marker where the weight should go. But I simply took a black marker and placed a mark where the original hose had a tape marker.

Tighter Braids Than The OEM Moens

The Sky Genius braided hose appears to be have more or tighter braids than the Moens. Our Moens original developed a hole in the rubber hose under the braid causing a leak. If the braids are a reflection of rubber hose inside, it should last longer than my last OEM of 3 years. This purchase was a perfect fit for my Moen pull down kitchen faucet.

As good as the original

I had to replace the original hose after a pin size hole was creating a leak. This hose was easy to install. Works just like the original. I did have to had a piece of thread seal tape when I put the nozzle back on. Been in use about 2 months with no issues.

Easy to replace

This replacement fit my faucet perfectly. Only difference I see is the old part had to be wrench tightened at the sprayer head, this one gets hand tightened onto the plastic threads, so no need for tape or tools. As far as the other end, there's a very simple plastic clip which easily unlocks, by hand and is reusable. Just make sure to turn off the water supplies first, there will be some water left over in the old hose. Time will tell how long this one lasts, but I was very satisfied with the new Moen Replacement hose kit and would recommend it.

Kitchen faucet hose

Matched up perfectly, thank you for the fast delivery.

Perfect replacement for this Moen pull down faucet !!

The replacement hose showed up on time and was simple and fast to replace. I held the old hose up next to this hose to get the measurement for the weight placement. The weight fit and snaps on perfectly. The only difference in the hoses is the nut that screws onto the spray head does not have two flat sides to tighten on with a wrench. I needed to hand tighten it using rubber hand grippers and it does not leak and looks perfect. Whole installation took about 10 mins.

Save your money. You don't need a plumber!

I was sure I'd need to call a plumber when I discovered a leak in my pull down sprayer hose. However, after researching the problem I ordered the replacement hose and it couldn't have been easier. I disconnected the old hose, pulled it out and put the new hose in and snapped it together. EASY PEASY! Imagine what a plumber would have charged me!

Great

Everything went fine.

Full Reviews